General Information |
|||
---|---|---|---|
Order Number | 2200000356 | ||
Net list price For larger quantities and individual prices, please use the request cart. Net list price | For pricing, please use the request cart to get a quote. | ||
Delivery time Delivery times may vary. Please ask for the current availability and use the request cart. Delivery time |
For information about shipping please use the request cart.
|
||
Destination | |||
Acquisition Type | Frame grabber | ||
Manufacturer | Basler | ||
Model Name | microEnable 5 marathon ACX-SP | ||
Product Series | marathon Frame Grabber | ||
Product Line | Acquisition |
Device Features |
||
---|---|---|
On-Board Memory | 512 MByte DDR3-RAM | |
I/O Module Interfaces (Trigger and Sync) | onboard: 8in/8out (max.), TTL or opto-coupled, Front GPIO: up to 3 differential signals in, up to 4 single-ended signals in (depends on configuration), 2 TTL outputs | |
Power via Interface (p. port) | PoCXP (17W/24V) |
Camera Interface |
||
---|---|---|
Standard | CoaXPress 1.0/1.1 | |
Interface |
|
|
Configurations | CXP1-6; 1 camera | |
Connectors | 1 x DIN 1.0/2.3 | |
Power output | SafePower, Power over CXP 13W/24V per cable | |
Camera Support | line scan camera, area scan camera | |
Sensor Type | CFA sensor (Bayer), Grayscale sensor, RGB sensor | |
Bit Depth | 8-16-bit (grayscale), 24-48-bit (color) | |
Data Bandwidth | 1 x 6,25 Gbit/s | |
Data Bandwidth (p.port; Total) | 6,25 Gbps; 6,25 Gbps | |
No. of Ports | 1 | |
Test Environment | Camera Simulator |
Host PC Interface |
||
---|---|---|
PC Bus Interface | PCIe 2.1 x4, DMA1800 | |
PC Bus Interface Performance | up to 1.800 MB/s (sustainable) |
Controls and General-Purpose I/Os |
||
---|---|---|
Trigger Board GPIO Interfaces | Box connector (34-pin) | |
On-board GPIO interface | One 34-pin flat cable connector onboard: 8 input signals and 8 output signals with open-drain optionally as 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422); 4 opto-coupled outputs (4,5V - 28V) | |
On-board Front GPIO Interface | 2 opto-coupled differential inputs (RS422) and 1 opto-coupled differential / single ended input, optional (conf.): 4 opto-coupled Inputs (4,5V - 28V) with up to 1 MHz frequency, 2 TTL outputs, up to 20 MHz frequency | |
GPIO Synchronisation and Control | Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization | |
GPIO Interface Summary | onboard: 8in/8out (max.), TTL or opto-coupled, Front GPIO: up to 3 differential signals in, up to 4 single-ended signals in (configuration dependent), 2 TTL outputs |
Processing Features |
||
---|---|---|
Basic Features | Offset/Gain/Gamma correction, Invert, ROI, White Balance, Mirroring, Image Selector, LUT |
Physical and Environmental Information |
||
---|---|---|
Dimensions | PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height | |
Weight (typical) | 200 g | |
Power Consumption / Power Source | typ. 0.8 A @ 12V (actual values depend on image pre-processing) | |
Operating Temperature | 50° (0 LFM*), 60° (100 LFM) FPGA operating temperature: 0°C to 85°C | |
Storage Temperature | -50°C up to 80°C | |
Relative Humidity (operating, storage) | 5% - 90% non-condensing (operating), 0% - 95% (storage) | |
MTBF | pending | |
Compliances | CE class B, WEEE, RoHS, REACH |
Software |
||
---|---|---|
Software Drivers | Windows 10 / 8 / 7 (32-Bit), Windows 10 / 8 / 7 (64-Bit), Linux 32-Bit, Linux 64-Bit | |
Software Tools | microDisplay (Acquisition control and viewer), GenICam Explorer (Camera configuration tool), microDiagnostics (Analysis and service tool), Device Drivers, SDK, Documentation | |
Software API | .net interface, Framegrabber SDK | |
FPGA Programming | not programmable | |
MV Software Compatibility | others on request, Halcon, VisionPro, Labview |