imaFlex CXP-12 Quad
- CoaXPress (CXP-12) Interface
- 4 No. of Ports
- 12.5 Gbps; 50 Gbps Data Bandwidth (p.port; Total)
imaFlex CXP-12 Quad is a programmable CoaXPress 2.0 frame grabber that allows a full bandwidth connection of up to four CXP-12 cameras.
| Net list price | €2,009.00 |
|---|---|
| Ready for dispatch |
|
Akeneo
| Conformity |
|
|---|
General Information
| Order Number | 2200002351 |
|---|---|
| Type | Frame grabber |
| Product Series | imaFlex Programmable Frame Grabber |
| Product Type | Processing |
| Warranty | 36 Months |
Device Features
| Processor | Xilinx Ultrascale+ KU3P |
|---|---|
| On-Board Memory | 1.5 GByte DDR4-RAM |
| I/O Module Interfaces (Trigger and Sync) | Trigger/GPIO-IF (Opto Trigger, TTL Trigger) |
| Acquisition Card Features |
|
Camera Interface
| Standard | CoaXPress 2.0/2.1 |
|---|---|
| Interface | CoaXPress (CXP-12) |
| Configurations | CXP-12; up to 4 cameras |
| Connectors | 4 x Micro-BNC/HD-BNC |
| Cable Length | 11 - 40 meters |
| Power output | 17W/24V DC regulated power per CXP connector |
| Camera Support |
|
| Sensor Type |
|
| Sensor Resolution | 32k*64k (area scan sensor), 16k (line scan sensor) |
| Bit Depth |
|
| Data Bandwidth | 4 x 12.5 Gbit/s (1,560 MB/s) |
| Data Bandwidth (p.port; Total) | 12.5 Gbps; 50 Gbps |
| No. of Ports | 4 |
| Test Environment | Camera Simulator |
Host PC Interface
| PC Bus Interface | PCIe 3.0 x8 |
|---|---|
| PC Bus Interface Performance | 7876 MB/s (theoretical), 6520 MB/s (typical/max.) |
Controls and General-Purpose I/Os
| Trigger Board GPIO Interfaces | Box connector (34-pin) |
|---|---|
| On-board GPIO interface | One 34-pin flat cable connector onboard: 8 input signals and 8 output signals with open-drain optionally as 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422); 4 opto-coupled outputs (4,5V - 28V) |
| On-board Front GPIO Interface | 3 differential input signals or 2 differential and 1 single-ended signal or 4 single-ended signals; 2 TTL output signals; configurable by software GPIOTool; max. voltage of the input signals between 4,5V and 25V |
| GPIO Synchronisation and Control | Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization |
| GPIO Interface Summary | 12 in/10 out (max.), TTL or opto-coupled; differential or single-ended signals (configuration dependent) |
Processing Features
| Basic Features |
|
|---|
Physical and Environmental Information
| Dimensions | PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height |
|---|---|
| Weight | 274 g |
| Power Consumption / Power Source | Typ. 13,4W@12V, excluding camera and I/O power output |
| Operating Temperature | 0 - 50 °C (32 - 122 °F) |
| Storage Temperature | -50 - 80 °C (-58 °F - 176 °F) |
| Relative Humidity (operating, storage) | 5 - 90 % non-condensing (operating), 0 - 95 % (storage) |
| MTBF | 48.440 h |
Software
| Software Drivers |
|
|---|---|
| Software Tools |
|
| Software API |
|
| FPGA Programming | VisualApplets |
| MV Software Compatibility | GenTL-based MV-Software |