Your browser is out of date. It may not display all features of this websites. Learn how to update your browser.

OK
Careers | Investors

acA4112-30um - Basler ace

The Basler acA4112-30um USB 3.0 camera with the Sony IMX253 CMOS sensor delivers 30 frames per second at 12.3 MP Resolution.

USB3 Vision
Add to request cart
Add to watch list
  • Basler ace - acA4112-30um
  • Basler ace - acA4112-30um
  • Basler ace - acA4112-30um
  • Basler ace - acA4112-30um

General Information

Design-In Sample: now
Series Production: 08/2017
Order Number 107416
Product Line ace L

Sensor

Sensor Vendor Sony
Sensor IMX253
Shutter Global Shutter
Max. Image Circle 1.1"
Sensor Type CMOS
Sensor Size 14.1 mm x 10.3 mm
Resolution (H x V) 4096 px x 3000 px
Resolution 12 MP
Pixel Size (H x V) 3.45 µm x 3.45 µm
Frame Rate 30 fps
Mono/ Color Mono

EMVA Data

EMVA Quantum Efficiency (typical) 70.0 %
Dark Noise (typical) 2.4 e¯
Saturation Capacity (typical) 10.4 ke¯
Dynamic Range (typical) 72.8 dB
Signal- to -Noise Ratio 40.2 dB

Camera Data

Interface USB 3.0
Video Output Format
  • Mono 8
  • Mono 12 Packed
  • Mono 12
Pixel Bit Depth 10 or 12 bits
Synchronization
  • software trigger
  • free-run
  • hardware trigger
Exposure Control
  • hardware trigger
  • programmable via the camera API
Digital Input 1
Digital Output 1
General Purpose I/O 2
Power Requirements
  • Via USB 3.0 interface

Housing

Housing Type Box
Housing Size (L x W x H) 35.8 mm x 40 mm x 30 mm
Lens Mount
  • C-mount
Housing Temperature 0 - 50°C
Weight (typical) 80g

Conformity

Conformity
  • CE
  • RoHS
  • GenICam
  • IP30
  • FCC
  • USB3 Vision
  • UL (in preparation)

Features

Chunks
  • CRC Checksum
  • Counter Value
  • Exposure Time
  • Gain
  • Line Status All
  • Sequencer Set Active
  • Timestamp
Event Reporting
  • Critical Temperature
  • Exposure End
  • Frame Burst Start
  • Frame Burst Start Overtrigger
  • Frame Burst Start Wait
  • Frame Start
  • Frame Start Overtrigger
  • Frame Start Wait
  • Over Temperature
Image Acquisition Control
  • Acquisition Status
  • Frame Burst Start Trigger
  • Frame Start Trigger
  • Trigger Delay
  • Triggered by Hardware
  • Triggered by Software
Miscellaneous
  • Device Information Parameters
  • Device Temperature
  • Remove Parameter Limits
  • User Defined Values
  • User Sets (Configuration Sets)
Physical Interface and I/O Control
  • Debouncer
  • I/O Signals: Frame Burst Start Wait
  • I/O Signals: Frame Start Wait
  • I/O Signals: Timer 1 Active
  • I/O Signals: User Output
  • Minimum Output Pulse Width
Pixel Formats
  • Mono 12p (Mono 12 Packed)
  • Mono 8
Standard Features
  • Auto Function Profile
  • Binning Horizontal
  • Binning Vertical
  • Black Level
  • Digital Shift
  • Exposure Auto
  • Exposure Mode: Timed (Control via API)
  • Exposure Mode: Trigger Width (Control via External Trigger)
  • Gain
  • Gain Auto
  • Gamma Correction
  • Lookup Table (LUT)
  • Region of Interest (ROI)
  • Reverse X (Horizontal Mirroring)
  • Reverse Y (Vertical Mirroring)
  • Test Images
Cables

Cables

We offer a broad portfolio of data cables and Power I/O cables for the ace camera series.The Power I/O cables are part of the Basler Original Equipment family and have been designed for perfect harmonization with Basler cameras. The data cables have all also been extensively tested for compatibility with the ace cameras. We carefully preselect and review our suppliers to ensure long-term availability of these high-quality cables.

Matching accessories often sold together with this product:

 - Cable USB 3.0, Micro B screw lock/A, 3 m
 - Cable USB 3.0, Micro B screw lock/A, 3 m
Cable USB 3.0, Micro B screw lock/A, 3 m
Accessory Type Data Cables
Interface USB 3.0
Cable Length 3.0 m
Connector Camera Side USB 3.0 Micro B, locking screws
Connector Host Side USB 3.0 Type A
 - Power-I/O PLC+ Cable 6p/open, 10 m
 - Power-I/O PLC+ Cable 6p/open, 10 m
Power-I/O PLC+ Cable 6p/open, 10 m
Accessory Type IOs / Power Cables
Interface I/O
Cable Length 10.0 m
Connector Camera Side Hirose 6-pin (HR10A-7P-6S)
Connector Host Side none (open end)
 - Cable USB 3.0, Micro B sl / A, DrC, 5 m
 - Cable USB 3.0, Micro B sl / A, DrC, 5 m
Cable USB 3.0, Micro B sl / A, DrC, 5 m
Accessory Type Data Cables
Interface USB 3.0
Cable Length 5.0 m
Connector Camera Side USB 3.0 Micro B, locking screws
Connector Host Side USB 3.0 Type A
 - Opto-GP-I/O Y-Cable 6p/open, 2 x 10 m
 - Opto-GP-I/O Y-Cable 6p/open, 2 x 10 m
Opto-GP-I/O Y-Cable 6p/open, 2 x 10 m
Accessory Type IOs / Power Cables
Interface I/O
Cable Length 10.0 m
Connector Camera Side Hirose 6-pin (HR10A-7P-6S)
Connector Host Side none (open end)
All Cables - acA4112-30um
Additional Accessories

Additional Accessories

You'll find additional accessories for your ace camera here: Among the products we offer are pre-tested host adapter cards (PCIe), power supplies, hubs and switches, all optimally matched with the ace camera series.

Matching accessories often sold together with this product:

value

Manuals

The category “Manuals” contains User’s Manuals and Installation Guides for your camera. These documents provide detailed information about proper installation and use of your Basler camera.

All Manuals - acA4112-30um
value

White Papers

Basler White Papers provide a comprehensive overview of the fundamental theory of industrial image processing. The authors are all experts in their respective fields and go into detail on relevant thematic points of interest to novices and experienced users alike.

All White Papers - acA4112-30um
value

Success Stories

Basler Success Stories describe a broad diversity of applications and potential uses for Basler camera models on a variety of markets. They explain the requirements Basler’s customers had to face while designing their image processing system and how Basler cameras successfully contributed to resolving the problem.

All Success Stories - acA4112-30um
value

Application Notes

Application Notes provide information beyond the scope of the user’s manuals related to working with Basler cameras, components and software. They typically contain detailed instructions on optimizing your camera or configuring the software.

All Application Notes - acA4112-30um
value

Marketing Notes

Basler Marketing Notes highlight noteworthy information about the technical properties and features of various camera models. The notes focus strongly on product-related topics, offering insights from the point of view of a Basler product manager.

All Marketing Notes - acA4112-30um
value

EMVA Data

The EMVA 1288 Standard from the European Machine Vision Association defines a uniform method for measuring specification parameters for cameras and image sensors in industrial image processing. It also describes how this process makes the values more easily comparable.

This measurement report describes the specifications for Basler ace cameras.

All EMVA Data - acA4112-30um
value

CAD / Technical Drawings

CAD (Computer-Aided Design) drawings for the Basler ace contain technical drawing of the camera in 2D and a volume model in 3D.

All CAD / Technical Drawings - acA4112-30um
value

Brochures

Basler product brochures provide an overview of the many benefits offered by Basler ace cameras. They describe technical characteristics and camera features and offer detailed information about the technical specifications.

All Brochures - acA4112-30um
value

Release Notes

Release Notes are part of the documentation for the Basler pylon Camera Software Suite and contain not just release data and software version information, but also notes on improvements, known bugs and changes.

All Release Notes - acA4112-30um
value

ReadMe

ReadMe files are short sets of instruction related to software installation. They are included in plain text form as part of the documentation of the Basler pylon Camera Software Suite. They typically contain information about system requirements, performance optimizations, sample programs, environmental variables and version information.

All ReadMe - acA4112-30um
value

Certificates

Certificates such as the Declaration of EC Conformity, the ISO 9001 Certificate and the KCC Certificate document that Basler products conform to the respective standards and guidelines.

All Certificates - acA4112-30um

Mechanical drawing for acA4112-30um

Mechanical drawings provide the detailed measurements of a camera product. Click on the link below to download the mechanical drawing for acA4112-30um.

Download now Basler ace - acA4112-30um