Your browser is out of date. It may not display all features of this websites. Learn how to update your browser.

OK
Careers | Investors

acA2040-25gmNIR - Basler ace

The Basler acA2040-25gmNIR GigE camera with the CMOSIS CMV4000 CMOS sensor (NIR enhanced) delivers 25 frames per second at 4 MP resolution.

GigE Vision
Add to request cart
Request test camera
Add to watch list
  • Basler ace - acA2040-25gmNIR
  • Basler ace - acA2040-25gmNIR
  • Basler ace - acA2040-25gmNIR
  • Basler ace - acA2040-25gmNIR

General Information

Order Number 106160
Product Line ace classic

Sensor

Sensor Vendor CMOSIS
Sensor CMV4000 NIR-enhanced
Shutter Global Shutter
Max. Image Circle 1"
Sensor Type CMOS
Sensor Size 11.3 mm x 11.3 mm
Resolution (H x V) 2048 px x 2048 px
Resolution 4 MP
Pixel Size (H x V) 5.5 µm x 5.5 µm
Frame Rate 25 fps
Mono/ Color Mono

EMVA Data

EMVA Quantum Efficiency (typical) 61.9 %
Dark Noise (typical) 14.0 e¯
Saturation Capacity (typical) 12.4 ke¯
Dynamic Range (typical) 59.0 dB
Signal- to -Noise Ratio 40.9 dB

Camera Data

Interface GigE
Video Output Format
  • Mono 8
  • YUV 4:2:2 (YUYV) Packed
  • YUV 4:2:2 Packed
  • Mono 12
  • Mono 12 Packed
Synchronization
  • hardware trigger
  • free-run
  • Ethernet connection
Exposure Control
  • programmable via the camera API
  • hardware trigger
Digital Input 1
Digital Output 1
Power Requirements
  • PoE or 12 VDC
Power Consumption (typical) 2.6 W
Power Consumption PoE 3.1 W

Housing

Housing Type Box
Housing Size (L x W x H) 42 mm x 29 mm x 29 mm
Lens Mount
  • C-mount
Housing Temperature 0 - 50°C
Weight (typical) 90g

Conformity

Conformity
  • CE
  • RoHS
  • GenICam
  • GigE Vision
  • IP30
  • UL
  • FCC
  • IEEE 802.3af (PoE)

Features

Chunks
  • CRC Checksum
  • Exposure Time
  • Frame Counter
  • Line Status All
  • Sequence Set Index
  • Timestamp
  • Trigger Input Counter
Color Creation and Enhancement
  • sRGB Gamma Correction
Event Reporting
  • Acquisition Start
  • Acquisition Start Overtrigger
  • Exposure End
  • Frame Start
  • Frame Start Overtrigger
Image Acquisition Control
  • Acquisition Start Trigger
  • Acquisition Status
  • Frame Burst Start Trigger
  • Frame Start Trigger
  • Trigger Delay
  • Triggered by Hardware
  • Triggered by Software
Miscellaneous
  • Device Information Parameters
  • Remove Parameter Limits
  • User Defined Values
  • User Sets (Configuration Sets)
Physical Interface and I/O Control
  • Line Source Signals: Acquisition Start Wait
  • Line Source Signals: Exposure Active
  • Line Source Signals: Frame Start Wait
  • Line Source Signals: Sync User Output
  • Line Source Signals: Timer Active
  • Line Source Signals: User Output
Pixel Formats
  • Mono 12p (Mono 12 Packed)
  • Mono 8
  • YCbCr422_8 (YUV422_8)
Standard Features
  • Auto Function Profile
  • Binning Horizontal
  • Binning Vertical
  • Black Level
  • Decimation Vertical
  • Digital Shift
  • Exposure Auto
  • Exposure Mode: Trigger Width (Control via External Trigger)
  • Gain
  • Gain Auto
  • Gamma Correction
  • Lookup Table (LUT)
  • Region of Interest (ROI)
  • Reverse X (Horizontal Mirroring)
  • Reverse Y (Vertical Mirroring)
  • Stacked Zones Imaging
  • Test Images
Lenses

Lenses

On all cameras from the ace camera series featuring sensors of 1/2'' or smaller, you'll benefit from a perfect harmonization of camera and Basler Lenses. For ace cameras with larger sensors, you'll find lenses from certified and reliable manufacturers. These lenses have been tested extensively for compatibility with our ace cameras. You'll also find matching lens accessories here.

Matching accessories often sold together with this product:

 - Kowa Lens LM6HC F1.8 f6mm 1
 - Kowa Lens LM6HC F1.8 f6mm 1
Kowa Lens LM6HC F1.8 f6mm 1"
Lens Mount C-mount
Max. Image Circle 1"
Focal Length 6.0 mm
Iris Range F1.8 - F16.0
Iris Type manual
 - Kowa Lens LM8HC F1.4 f8mm 1
 - Kowa Lens LM8HC F1.4 f8mm 1
Kowa Lens LM8HC F1.4 f8mm 1"
Lens Mount C-mount
Max. Image Circle 1"
Focal Length 8.0 mm
Iris Range F1.4 - F16.0
Iris Type manual
 - Kowa Lens LM12HC F1.4 f12.5mm 1
 - Kowa Lens LM12HC F1.4 f12.5mm 1
Kowa Lens LM12HC F1.4 f12.5mm 1"
Lens Mount C-mount
Max. Image Circle 1"
Focal Length 12.5 mm
Iris Range F1.4 - F16.0
Iris Type manual
 - Kowa Lens LM25HC F1.4 f25mm 1
 - Kowa Lens LM25HC F1.4 f25mm 1
Kowa Lens LM25HC F1.4 f25mm 1"
Lens Mount C-mount
Max. Image Circle 1"
Focal Length 25.0 mm
Iris Range F1.4 - F16.0
Iris Type manual
All Lenses - acA2040-25gmNIR
Cables

Cables

We offer a broad portfolio of data cables and Power I/O cables for the ace camera series.The Power I/O cables are part of the Basler Original Equipment family and have been designed for perfect harmonization with Basler cameras. The data cables have all also been extensively tested for compatibility with the ace cameras. We carefully preselect and review our suppliers to ensure long-term availability of these high-quality cables.

Matching accessories often sold together with this product:

 - Power-I/O Cable HRS 6p/open, twisted, 10 m
 - Power-I/O Cable HRS 6p/open, twisted, 10 m
Power-I/O Cable HRS 6p/open, twisted, 10 m
Accessory Type IOs / Power Cables
Interface I/O
Cable Length 10.0 m
Connector Camera Side Hirose 6-pin (HR10A-7P-6S)
Connector Host Side none (open end)
 - Cable GigE Cat 6, S/STP, 1x screw lock horizontal, DrC, 5 m
 - Cable GigE Cat 6, S/STP, 1x screw lock horizontal, DrC, 5 m
Cable GigE Cat 6, S/STP, 1x screw lock horizontal, DrC, 5 m
Accessory Type Data Cables
Interface GigE
Cable Length 5.0 m
Connector Camera Side RJ-45, horizontal locking screws
Connector Host Side RJ-45, click-lock
 - Power-I/O PLC+ Cable 6p/open, 10 m
 - Power-I/O PLC+ Cable 6p/open, 10 m
Power-I/O PLC+ Cable 6p/open, 10 m
Accessory Type IOs / Power Cables
Interface I/O
Cable Length 10.0 m
Connector Camera Side Hirose 6-pin (HR10A-7P-6S)
Connector Host Side none (open end)
 - Opto-GP-I/O Y-Cable 6p/open, 2 x 10 m
 - Opto-GP-I/O Y-Cable 6p/open, 2 x 10 m
Opto-GP-I/O Y-Cable 6p/open, 2 x 10 m
Accessory Type IOs / Power Cables
Interface I/O
Cable Length 10.0 m
Connector Camera Side Hirose 6-pin (HR10A-7P-6S)
Connector Host Side none (open end)
All Cables - acA2040-25gmNIR
Additional Accessories

Additional Accessories

You'll find additional accessories for your ace camera here: Among the products we offer are pre-tested host adapter cards (PCIe), power supplies, hubs and switches, all optimally matched with the ace camera series.

Matching accessories often sold together with this product:

value

Manuals

The category “Manuals” contains User’s Manuals and Installation Guides for your camera. These documents provide detailed information about proper installation and use of your Basler camera.

All Manuals - acA2040-25gmNIR
value

White Papers

Basler White Papers provide a comprehensive overview of the fundamental theory of industrial image processing. The authors are all experts in their respective fields and go into detail on relevant thematic points of interest to novices and experienced users alike.

All White Papers - acA2040-25gmNIR
value

Success Stories

Basler Success Stories describe a broad diversity of applications and potential uses for Basler camera models on a variety of markets. They explain the requirements Basler’s customers had to face while designing their image processing system and how Basler cameras successfully contributed to resolving the problem.

All Success Stories - acA2040-25gmNIR
value

Application Notes

Application Notes provide information beyond the scope of the user’s manuals related to working with Basler cameras, components and software. They typically contain detailed instructions on optimizing your camera or configuring the software.

All Application Notes - acA2040-25gmNIR
value

Marketing Notes

Basler Marketing Notes highlight noteworthy information about the technical properties and features of various camera models. The notes focus strongly on product-related topics, offering insights from the point of view of a Basler product manager.

All Marketing Notes - acA2040-25gmNIR
value

EMVA Data

The EMVA 1288 Standard from the European Machine Vision Association defines a uniform method for measuring specification parameters for cameras and image sensors in industrial image processing. It also describes how this process makes the values more easily comparable.

This measurement report describes the specifications for Basler ace cameras.

All EMVA Data - acA2040-25gmNIR
value

CAD / Technical Drawings

CAD (Computer-Aided Design) drawings for the Basler ace contain technical drawing of the camera in 2D and a volume model in 3D.

All CAD / Technical Drawings - acA2040-25gmNIR
value

Brochures

Basler product brochures provide an overview of the many benefits offered by Basler ace cameras. They describe technical characteristics and camera features and offer detailed information about the technical specifications.

All Brochures - acA2040-25gmNIR
value

Release Notes

Release Notes are part of the documentation for the Basler pylon Camera Software Suite and contain not just release data and software version information, but also notes on improvements, known bugs and changes.

All Release Notes - acA2040-25gmNIR
value

ReadMe

ReadMe files are short sets of instruction related to software installation. They are included in plain text form as part of the documentation of the Basler pylon Camera Software Suite. They typically contain information about system requirements, performance optimizations, sample programs, environmental variables and version information.

All ReadMe - acA2040-25gmNIR
value

Certificates

Certificates such as the Declaration of EC Conformity, the ISO 9001 Certificate and the KCC Certificate document that Basler products conform to the respective standards and guidelines.

All Certificates - acA2040-25gmNIR

Mechanical drawing for acA2040-25gmNIR

Mechanical drawings provide the detailed measurements of a camera product. Click on the link below to download the mechanical drawing for acA2040-25gmNIR.

Download now Basler ace - acA2040-25gmNIR