CXP-12 Interface Card 1C
- CoaXPress (CXP-12) Interface
- 1 No. of Ports
- 12.5 Gbps; 12.5 Gbps Data Bandwidth (p.port; Total)
The Basler CXP-12 Interface Card 1C offers a maximum bandwidth of 12.5 Gbps via 1-channel Micro-BNC (HD BNC) connection.
General Information
| Order Number | 2200000269 |
|---|---|
| Manufacturer | Basler |
| Type | PC Card (CXP-12) |
| Product Series | CXP-12 Interface Cards |
| Product Type | Acquisition |
| Warranty | 36 Months |
Device Features
| Processor | Xilinx Ultrascale+ KU3P |
|---|---|
| On-Board Memory | 1 GByte DDR4-RAM |
| I/O Module Interfaces (Trigger and Sync) | Front GPIO: up to 3 differential signals in, up to 4 single-ended signals in (depends on configuration), 2 TTL outputs |
| Power via Interface (p. port) | PoCXP (17W/24V per connector) |
| Acquisition Card Features |
|
Camera Interface
| Standard | CoaXPress 2.0/2.1 |
|---|---|
| Interface | CoaXPress (CXP-12) |
| Configurations | CXP-12; 1 camera |
| Connectors | 1 x Micro-BNC/HD-BNC |
| Cable Length | 11 - 40 meters |
| Power output | 17W/24VDC regulated power per CXP connector, device detection and short circuit protection |
| Camera Support |
|
| Sensor Type |
|
| Sensor Resolution | 32k*64k (area scan sensor), 16k (line scan sensor) |
| Bit Depth |
|
| Data Bandwidth | 1 x 12.5 Gbit/s (1,560 MB/s) |
| Data Bandwidth (p.port; Total) | 12.5 Gbps; 12.5 Gbps |
| No. of Ports | 1 |
Host PC Interface
| PC Bus Interface | PCIe 3.0 x4 |
|---|---|
| PC Bus Interface Performance | 3938 MB/s (theoretical), 3260 MB/s (typical/max.) |
Controls and General-Purpose I/Os
| On-board Front GPIO Interface | 3 differential input signals or 2 differential and 1 single-ended signal or 4 single-ended signals; 2 TTL output signals; configurable by software GPIOTool; max. voltage of the input signals between 4,5V and 25V |
|---|---|
| GPIO Interface Summary | 4 in/2 out (max.), TTL or opto-coupled; differential or single-ended signals (configuration dependent) |
Processing Features
| Basic Features |
|
|---|
Physical and Environmental Information
| Dimensions | PCIe Standard height, low profile card: 167.64 mm length x 68.9 mm height |
|---|---|
| Weight | 170 g |
| Power Consumption / Power Source | Typ. 13,4W@12V, excluding camera and I/O power output |
| Operating Temperature | 0 - 50 °C (32 - 122 °F) |
| Storage Temperature | -50 - 80 °C (-58 °F - 176 °F) |
| Relative Humidity (operating, storage) | 5 - 90 % non-condensing (operating), 0 - 95 % (storage) |
| MTBF | 2.399.621 h |
Software
| Software Drivers |
|
|---|---|
| Software Tools |
|
| Software API |
|
| MV Software Compatibility |
|
Manufacturer
| Basler |
|---|
Conformity
- CE (incl. RoHS)
- FCC
- ISO 9001:2015
- KC
- REACH
- UKCA
- WEEE
Features
For more information about the features, visit the Documentation
Easy Handling
| Image Selector | Use a module to select the images you want to keep, process, or forward. |
| Mirroring | Mirror the images in different directions to achieve your ideal hardware setup. |
| Tap Geometry Sorting | Reassign the sensor areas of the camera to obtain an evaluable image flow. |
Image Quality Optimization
| Flat Field Correction (FFC) | Ensure image homogeneity by correcting sensitivity variations, lens shading, or lighting artifacts. FFC sets allow accurate imaging under different and changing conditions. This feature is part of the Enhanced Applets. |
| PGI Color Reconstruction | With the PGI feature set of up to four image optimization processes, you can improve the quality of your images and adapt them to the needs of human vision. This feature is part of the Enhanced Applets. |
| White Balancing | Match the color values of your images to the system environment to achieve a more realistic representation. |
Process Control
| Overflow Management | Control the image flow of the camera and frame grabber to avoid data bottlenecks in the system. |
Speed Increase
| Digital Binning | Use the binning method to adjust the sensor pixels to meet your requirements by choosing from a selection of fixed values. Reduce the amount of data or increase the brightness values of the image. This feature is part of the Enhanced Applets. |
| ROI | Limit the image flow to relevant sensor areas to ensure efficient image processing. |
Suitable Products
Recommended software
pylon software for image acquisition
pylon offers certified drivers for many camera interfaces, simple programming interfaces, and practical tools for camera setup.
To the pylon Software
