Basler boost boA4096-93cm

IMX255 Sensor
93 fps Frame rate
CoaXPress (CXP-12) Interface
9 MP Resolution (MP)
1" Sensor Format

The Basler CoaXPress 2.0 boA4096-93cm camera with the Sony IMX255 CMOS sensor delivers 93 frames per second with a 9 MP resolution.

The boost series is available with different lens mounts (C-mount and F-mount). These must be purchased separately for the camera.

Optional accessories

Data Cable

Please select

Cable CXP, Micro-BNC x2 (HD BNC), P, 10 m +€105.50

Cable CXP, Micro-BNC x2 (HD-BNC), DrC,5m +€116.00

Cable CXP, Micro-BNC x2 (HD BNC), P, 5 m +€82.00

Cable CXP, Micro-BNC x2 (HD BNC), P, 3 m +€69.10

I/O Cables

Please select

Power-I/O Cable, M8 6p/open, P, 5 m +€29.20

Power-I/O Cable, M8 6p/open, P, 10 m +€42.10

Power Supply

Please select

Power Supply for Camera 18.0W, M8 6-pin +€47.30

Heat Sink

Please select

Heat sink for Basler boost R cameras +€14.00

Quantity

Suitable Products

Required software

pylon vTools for image processing
Design robust image processing software for quality assurance and tracking. Functions such as blob analysis, matching, and code reader can be combined using drag-and-drop design and flexibly integrated into the target application.
pylon Software for image acquisition
pylon offers certified drivers for many camera interfaces, as well as simple programming interfaces and practical tools for camera setup.

Net list price	€2,509.00
Ready for dispatch	Standardapprox. 4 weeks

Manufacturer	Basler
Order Number	107803
Product Family	boost R
Camera Series	Basler boost
Camera Category	Area Scan Camera
Warranty	36 Months

Sensor Vendor	Sony
Sensor	IMX255
Shutter	Global Shutter
Sensor Format	1"
Sensor Diagonal	15.97 mm
Sensor Type	CMOS
Sensor Size	14.1 mm × 7.5 mm
Resolution (H x V)	4096 px × 2168 px
Resolution	9 MP
Pixel Size (H x V)	3.45 μm × 3.45 μm
Frame rate	93 fpsCalculate individual frame rate
Mono/Color	Mono
Spectrum	Visible

Quantum Efficiency (typical/minimal)	60.9 % (typical)
Dark Noise (typical/maximal)	2.1 e¯ (typical)
Saturation Capacity (typical/minimal)	10.2 ke¯ (typical)
Dynamic Range (typical/minimal)	71.2 dB (typical)
Signal-to-Noise Ratio (typical/minimal)	40.1 dB (typical)

Interface	CoaXPress (CXP-12)
Image Data Interface	CoaXPress (2.5–12.5 Gbps)
Synchronization	free-run hardware trigger software trigger
Exposure Control	hardware trigger programmable via the camera API
Digital Input	1
General Purpose I/O	2
Power Supply	PoCXP or 24 VDC
Power Requirements (typical)	8 W

Basler boost boA4096-93cm

General Information

Sensor

EMVA Data

Camera Data

Housing

Technical Drawing

Manufacturer

Conformity

Features & Documentation

Color Creation

I/O Control

Image Acquisition Control

Light Control Features

Line Source Signals

MED Features

Miscellaneous

Pixel Formats

Standard Features

Suitable Products

Required software

pylon vTools for image processing

pylon Software for image acquisition

Housing Type	Box
Housing Size (L x W x H)	45 mm x 80 mm x 80 mm
Weight	480 g
Lens Mount	C-mount F-mount M42 x 0.75 M42 x 1
Operating Temperature	0 °C - 50 °C

Acquisition Frame Rate
Acquisition Mode
Acquisition Start, Stop, and Abort
Acquisition Status
Exposure Active Trigger
Exposure End Trigger
Exposure Start Trigger
Frame Active Trigger
Frame Burst Active Trigger
Frame Burst End Trigger
Frame Burst Start Trigger
Frame End Trigger
Frame Start Trigger
Sensor Readout Time
Triggered Image Acquisition

Counter Active
Exposure Active
Flash Window
Frame Burst Active
Frame Burst Trigger Wait
Frame Trigger Wait
Serial Tx
Timer 1 Active, Timer 2 Active
User Output 1, 2, and 3

Device Information Parameters
Device Temperature
Improvement of Image Quality	Reduce image artifacts caused by environmental influences. Correct individual pixel errors using Defect Pixel Correction.
Presettings	Automate recurring steps in your application by using the camera's default settings and/or creating and saving your own presets.
Sensor Bit Depth
Temperature State
User-Defined Values
Vignetting Correction	Correct lens shading artifacts that occur in acquired images.

Auto Function Profile
Auto Functions	Use the camera's auto functions to allow the camera to find the optimum settings for exposure time, gain, and white balance, for example. This simplifies camera integration into your application.
Binning
Center X and Center Y
Counter
Digital Shift
Exposure Auto
Exposure Mode: Timed
Exposure Mode: Trigger Controlled
Exposure Mode: Trigger Width
Exposure Time
Gain
Gamma Correction
Image Adjustment	Adjust pixel values losslessly with Black Level, Digital Shift, and other standard features.
Image ROI (Region of Interest)
Lookup Table (LUT)
Multiple ROI
Reverse X (Horizontal Mirroring)
Reverse Y (Vertical Mirroring)
Sequencer (ace 2 and boost R)
Test Patterns
Timer
Ultra Short Exposure Time Mode