Basler boost boA4504-100cm

IMX531 Sensor
100 fps Frame rate
20 MP Resolution (MP)
CoaXPress (CXP-12) Interface
1.1" Sensor Format

The Basler CoaXPress 2.0 boA4504-100cm camera with the Sony IMX531 CMOS sensor delivers 150 frames per second with a 20 MP resolution.

Recommended accessories

Interface Cards

- select -

imaWorx CXP-12 Quad +€1,639.00

CXP-12 Interface Card 2C +€1,079.00

CXP-12 Interface Card 4C +€1,569.00

Data Cable

- select -

Cable CXP, Micro-BNC x2 (HD BNC), P, 10 m +€109.00

Cable CXP, Micro-BNC x2 (HD-BNC), DrC,5m +€116.00

Cable CXP, Micro-BNC x2 (HD BNC), P, 5 m +€79.00

Cable CXP, Micro-BNC x2 (HD BNC), P, 3 m +€69.00

I/O Cables

- select -

Power-I/O Cable, M8 6p/open, P, 5 m +€29.20

Power Supply

- select -

Power Supply for Camera 18.0W, M8 6-pin +€47.30

Mount

- select -

F-mount for boost R, racer, Basler beat +€65.90

M42x0.75-mount (FBD 16 mm) for boost, racer, Basler beat +€17.90

C-mount for boost R, racer +€9.90

M42x1-mount (FBD 45.56 mm) for boost R, racer, Basler beat +€49.90

M42x1-mount (FBD 16 mm) for boost, racer, Basler beat +€17.90

Suitable Products

Recommended software

pylon vTools for image processing
Design robust image processing software for quality assurance and tracking. Functions such as blob analysis, matching, and code reader can be combined using drag-and-drop design and flexibly integrated into the target application.
pylon Software for image acquisition
pylon offers certified drivers for many camera interfaces, as well as simple programming interfaces and practical tools for camera setup.

Manufacturer	Basler
Order Number	108378
Product Family	boost R
Camera Series	Basler boost
Camera Category	Area Scan Camera
Warranty	36 Months

Sensor Vendor	Sony
Sensor	IMX531
Shutter	Global Shutter
Sensor Format	1.1"
Sensor Type	CMOS
Sensor Size	12.3 mm × 12.3 mm
Resolution (H x V)	4504 px × 4504 px
Resolution	20 MP
Pixel Size (H x V)	2.74 μm × 2.74 μm
Frame rate	100 fpsCalculate individual frame rate
Mono/Color	Mono
Spectrum	Visible

Quantum Efficiency (typical/minimal)	67.3 % (typical)
Dark Noise (typical/maximal)	39.8 e¯ (typical)
Saturation Capacity (typical/minimal)	9.6 ke¯ (typical)
Dynamic Range (typical/minimal)	70.8 dB (typical)
Signal-to-Noise Ratio (typical/minimal)	39.8 dB (typical)

Interface	CoaXPress (CXP-12)
Image Data Interface	CoaXPress (2.5–12.5 Gbps)
Digital Input	1
General Purpose I/O	2
Power Requirements (typical)	10.6 W

Housing Type	Box
Housing Size (L x W x H)	45 mm x 80 mm x 80 mm
Weight	525 g
Operating Temperature	max 50 °C

Basler boost boA4504-100cm

General Information

Sensor

EMVA Data

Camera Data

Housing

Technical Drawing

Manufacturer

Conformity

Documentation

Features

Easy Handling

Image Quality Optimization

Process Control

Speed Increase

Suitable Products

Recommended software

pylon vTools for image processing

pylon Software for image acquisition

Product successfully added to cart

Image Adjustment	Adjust pixel values losslessly with Black Level, Digital Shift, and other standard features.
Vignetting Correction	Correct lens shading artifacts that occur in acquired images.

Burst Mode	Acquire a sequence of images after triggering once and output them as required. In High-Speed Burst Mode, you can temporarily bypass the data limitation of GigE.
Information Utilisation	Use additional information from Chunks and Events to optimize your automation.
Intelligent Light Control (SLP)	Control the lighting directly with the camera. By synchronizing the flash mode and adjusting the brightness levels, you can quickly achieve precise lighting conditions and shorten the development time of your application.
Sequencer	Program sequential processes in the camera to control image acquisition and pre-processing in real time.
Timing	Control the start and end of an exposure individually. Add delays or synchronize multiple cameras in a GigE network using PTP.