Basler ace 2 a2A4200-40umBAS

GMAX2509 Sensor
40 fps Frame rate
9.1 MP Resolution (MP)
USB 3.0 Interface
2/3" Sensor Format

The Basler a2A4200-40umBAS USB3.0 camera with the Gpixel GMAX2509 CMOS sensor delivers 40 frames per second at 9.1 MP resolution.

Select your model

Select Product Line:

Select Interface:

Select Mono/Color:

Recommended accessories

Lens

3-year warranty on Basler productsDirect support from local Basler teamsSecure checkout and data protection

Show suitable products

Suitable Products

Recommended software

pylon vTools for image processing
Design robust image processing software for quality assurance and tracking. Functions such as blob analysis, matching, and code reader can be combined using drag-and-drop design and flexibly integrated into the target application.
pylon Software for image acquisition
pylon offers certified drivers for many camera interfaces, as well as simple programming interfaces and practical tools for camera setup.

All Basler ace 2 Models

Haven't found the right model? See the product list for an overview of all ace 2 models. Find the right product for your application: filter by sensor, resolution, frame rate, and more.

To the ace 2 product table

Manufacturer	Basler
Order Number	108362
Product Family	ace 2 R
Product Line	ace 2 R Basic
Camera Series	Basler ace 2
Camera Category	Area Scan Camera
Warranty	36 Months

Sensor Vendor	Gpixel
Sensor	GMAX2509
Shutter	Global Shutter
Sensor Format	2/3"
Sensor Diagonal	11.8 mm
Sensor Type	CMOS
Sensor Size	10.52 mm × 5.42 mm
Resolution (H x V)	4200 px × 2160 px
Resolution	9.1 MP
Pixel Size (H x V)	2.5 μm × 2.5 μm
Frame rate	40 fpsCalculate individual frame rate
Mono/Color	Mono
Spectrum	Visible

Measured at	541 nm
Quantum Efficiency (typical/minimal)	53.3 % (typical)
Dark Noise (typical/maximal)	1.1 e¯ (typical)
Saturation Capacity (typical/minimal)	4.7 ke¯ (typical)
Dynamic Range (typical/minimal)	68.3 dB (typical)
Signal-to-Noise Ratio (typical/minimal)	37 dB (typical)

Interface	USB 3.0
Camera Data Connector	USB 3.0 Type Micro B receptacle
Image Data Interface	USB 3.0, nominal max. 5 Gbit/s (SuperSpeed)
Pixel Bit Depth	8 bits 10 bits 12 bits
Exposure Control	hardware trigger programmable via the camera API
Camera I/O Connector	M8 6-Pin receptacle
Digital Input	1
General Purpose I/O	2
Power Supply	Via USB 3.0 interface
Power Requirements (typical)	3.1 W

Housing Type	Box
Protection Class	IP30
Housing Size (L x W x H)	42.8 mm x 29 mm x 29 mm
Weight	85 g
Lens Mount	C-mount
Operating Temperature	-10 °C - 60 °C

Basler ace 2 a2A4200-40umBAS

Select Product Line:

Select Interface:

Select Mono/Color:

General Information

Sensor

EMVA Data

Camera Data

Housing

Technical Drawing

Manufacturer

Conformity

Documentation

Features

Easy Handling

Image Quality Optimization

Process Control

Speed Increase

Suitable Products

Recommended software

pylon vTools for image processing

pylon Software for image acquisition

All Basler ace 2 Models

Product successfully added to cart

Auto Functions	Use the camera's auto functions to allow the camera to find the optimum settings for exposure time, gain, and white balance, for example. This simplifies camera integration into your application.
Presettings	Automate recurring steps in your application by using the camera's default settings and/or creating and saving your own presets.

High Dynamic Range (HDR)	Expand the dynamic range by up to 16 bit. This ensures that bright areas are reproduced precisely and without loss of information, while preserving details in dark areas.
Image Adjustment	Adjust pixel values losslessly with Black Level, Digital Shift, and other standard features.
Improvement of Image Quality	Reduce image artifacts caused by environmental influences. Correct individual pixel errors using Defect Pixel Correction.

Burst Mode	Acquire a sequence of images after triggering once and output them as required. In High-Speed Burst Mode, you can temporarily bypass the data limitation of GigE.
Digital I/Os	Control the camera via trigger commands or use the camera to control components of your vision system, such as lighting or encoders.
Information Utilisation	Use additional information from Chunks and Events to optimize your automation.
Intelligent Light Control (SLP)	Control the lighting directly with the camera. By synchronizing the flash mode and adjusting the brightness levels, you can quickly achieve precise lighting conditions and shorten the development time of your application.