Your browser is out of date. It may not display all features of this websites. Learn how to update your browser.

Start configuring your vision system now Webshop

Application Notes

Interfacing Basler cameras with the Matrox MIL software

Document number: AW000648

The document describes the requirements and necessary adjustments for using a Basler GigE or USB 3.0 Vision camera with the Matrox Imaging Library (MIL) software. The following issues are covered:

  • Hardware requirements for using a Basler GigE Vision or USB 3.0 Vision camera.
  • Installation of the Matrox Imaging Library 10
  • If a Basler GigE Vision camera is used:
  • Setting up the MIL Config application for camera detection.
  • Configuring the IP address for the GigE network adapter using the Matrox Capture Assistant.
  • Configuring the camera’s IP address and adjusting transport layer parameters to maximize bandwidth.
  • If a Basler USB 3.0 Vision camera is used:
  • Installing the Matrox USB3 Vision Driver
  • Accessing the camera using the Matrox Intellicam software and adjusting, if necessary, settings for the driver or license.
  • Troubleshooting for GigE cameras, addressing the network adapter’s firewall and transport layer settings.

Download now for free

Back to Webshop