imaWorx CXP-12 Quad

CoaXPress (CXP-12) Interface
4 No. of Ports
Acquisition Product Type
12.5 Gbps; 50 Gbps Data Bandwidth (p.port; Total)

imaWorx CXP-12 Quad is a CoaXPress 2.0 frame grabber that allows a full bandwidth connection of up to four CXP-12 cameras.

The imaWorx CXP-12 Quad focuses on high-speed image acquisition and enables demanding machine vision applications with the latest PCIe technology.

microDisplayX configuration software
Up to 50 Gbps data bandwidth
Power over CoaXPress
Robust multi-frame grabber and multi-camera support with versatile synchronization options

3-year warranty on Basler productsDirect support from local Basler teamsSecure checkout and data protection

Suitable Products

Recommended software

Framegrabber SDK

Basler’s software for frame grabber: from the first image capture and graphic application development to the configuration of the entire image processing system.

More about the Framegrabber SDK

Order Number	2200000482
Manufacturer	Basler
Type	Frame grabber
Product Series	imaWorx Frame Grabber
Product Type	Acquisition
Warranty	36 Months

Processor	Xilinx Ultrascale+ KU3P
On-Board Memory	1.5 GByte DDR4-RAM
I/O Module Interfaces (Trigger and Sync)	Front GPIO: up to 3 differential signals in, up to 4 single-ended signals in (depends on configuration), 2 TTL outputs Trigger-/GPIO-Extension (for Opto Trigger or TTL Trigger)
Power via Interface (p. port)	PoCXP (17W/24V per connector)

Standard	CoaXPress 2.0/2.1
Interface	CoaXPress (CXP-12)
Configurations	CXP-12; up to 4 cameras
Connectors	4 x Micro-BNC/HD-BNC
Cable Length	11 - 40 meters
Power output	17W/24VDC regulated power per CXP connector, device detection and short circuit protection
Camera Support	area scan camera line scan camera
Sensor Type	CFA sensor (Bayer) Grayscale sensor RGB sensor
Sensor Resolution	32k*64k (area scan sensor), 16k (line scan sensor)
Bit Depth	8-16-bit (grayscale) 24-48-bit (color)
Data Bandwidth	4 x 12.5 Gbit/s (1,560 MB/s)
Data Bandwidth (p.port; Total)	12.5 Gbps; 50 Gbps
Test Environment	Camera Simulator
No. of Ports	4

PC Bus Interface	PCIe 3.0 x8
PC Bus Interface Performance	7876 MB/s (theoretical), 6520 MB/s (typical/max.)

Trigger Board GPIO Interfaces	Box connector (34-pin)
On-board GPIO interface	One 34-pin flat cable connector onboard: 8 input signals and 8 output signals with open-drain optionally as 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422); 4 opto-coupled outputs (4,5V - 28V)
On-board Front GPIO Interface	3 differential input signals or 2 differential and 1 single-ended signal or 4 single-ended signals; 2 TTL output signals; configurable by software GPIOTool; max. voltage of the input signals between 4,5V and 25V
GPIO Synchronisation and Control	Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization
GPIO Interface Summary	12 in/10 out (max.), TTL or opto-coupled; differential or single-ended signals (configuration dependent)

imaWorx CXP-12 Quad

General Information

Device Features

Camera Interface

Host PC Interface

Controls and General-Purpose I/Os

Processing Features

Physical and Environmental Information

Software

Manufacturer

Conformity

Documentation

Features

Easy Handling

Image Quality Optimization

Process Control

Speed Increase

Suitable Products

Recommended software

Framegrabber SDK

Product successfully added to cart

Dimensions	PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height
Weight	274 g
Power Consumption / Power Source	Typ. 13,4W@12V, excluding camera and I/O power output
Operating Temperature	0 - 50 °C (32 - 122 °F)
Storage Temperature	-50 - 80 °C (-58 °F - 176 °F)
Relative Humidity (operating, storage)	5 - 90 % non-condensing (operating), 0 - 95 % (storage)
MTBF	48.440 h

Software Drivers	Linux 64-Bit Windows 11 / 10 (64-Bit)
Software Tools	Device Drivers Documentation microDiagnostics (Analysis and service tool) microDisplay X (Acquisition control and viewer) pylon Software Suite SDK
Software API	.net interface Framegrabber SDK GenTL pylon SDKs
MV Software Compatibility	GenTL-based MV-Software Halcon VisionPro

Image Selector	Use a module to select the images you want to keep, process, or forward.
Invert	Invert the pixel values of your images to enable more efficient image processing.
Mirroring	Mirror the images in different directions to achieve your ideal hardware setup.
Tap Geometry Sorting	Reassign the sensor areas of the camera to obtain an evaluable image flow.

Flat Field Correction (FFC)	Ensure image homogeneity by correcting sensitivity variations, lens shading, or lighting artifacts. FFC sets allow accurate imaging under different and changing conditions. This feature is part of the Enhanced Applets.
LUT	By creating a custom lookup table (LUT), you can replace the pixel values of your images with values you define yourself.
PGI Color Reconstruction	With the PGI feature set of up to four image optimization processes, you can improve the quality of your images and adapt them to the needs of human vision. This feature is part of the Enhanced Applets.
White Balancing	Match the color values of your images to the system environment to achieve a more realistic representation.

Digital Binning	Use the binning method to adjust the sensor pixels to meet your requirements by choosing from a selection of fixed values. Reduce the amount of data or increase the brightness values of the image. This feature is part of the Enhanced Applets.
ROI	Limit the image flow to relevant sensor areas to ensure efficient image processing.