Basler ace acA1920-25gc (CS-Mount)

MT9P031 Sensor
25 fps Frame rate
2 MP Resolution (MP)
GigE Interface
1/3.7" Sensor Format

The Basler acA1920-25gc (CS-Mount) GigE camera with the onsemi MT9P031 CMOS sensor delivers 25 frames per second at 2 MP resolution.

Recommended accessories

3-year warranty on Basler productsDirect support from local Basler teamsSecure checkout and data protection

Suitable Products

Recommended software

pylon vTools for image processing
Design robust image processing software for quality assurance and tracking. Functions such as blob analysis, matching, and code reader can be combined using drag-and-drop design and flexibly integrated into the target application.
pylon Software for image acquisition
pylon offers certified drivers for many camera interfaces, as well as simple programming interfaces and practical tools for camera setup.

All Basler ace Models

Haven't found the right model? See the product list for an overview of all ace models. Find the right product for your application: filter by sensor, resolution, frame rate, and more.

To the ace product table

Manufacturer	Basler
Order Number	106800
Product Family	ace Classic
Product Line	ace Classic
Camera Series	Basler ace
Camera Category	Area Scan Camera
Warranty	36 Months

Sensor Vendor	onsemi
Sensor	MT9P031
Shutter	Rolling Shutter
Sensor Format	1/3.7"
Sensor Diagonal	4.84 mm
Sensor Type	CMOS
Sensor Size	4.22 mm × 2.38 mm
Resolution (H x V)	1920 px × 1080 px
Resolution	2 MP
Pixel Size (H x V)	2.2 μm × 2.2 μm
Frame rate	25 fps
Mono/Color	Color
Spectrum	Visible

Quantum Efficiency - blue (typical/minimal)	7.21 % (typical)
Quantum Efficiency - green (typical/minimal)	41.09 % (typical)
Quantum Efficiency - red (typical/minimal)	6.72 % (typical)
Dark Noise (typical/maximal)	6.7 e¯ (typical)
Saturation Capacity (typical/minimal)	6.8 ke¯ (typical)
Dynamic Range (typical/minimal)	60 dB (typical)
Signal-to-Noise Ratio (typical/minimal)	38.3 dB (typical)

Interface	GigE
Camera Data Connector	RJ45 receptacle (GigE)
Image Data Interface	Fast Ethernet (100 Mbit/s), Gigabit Ethernet (1000 Mbit/s)
Pixel Bit Depth	12 bits
Synchronization	Ethernet connection free-run hardware trigger
Exposure Control	hardware trigger programmable via the camera API
Camera I/O Connector	Hirose HR10A 6-pin plug
Digital Input	1
Digital Output	1
Power Supply	PoE or 12 VDC
Power Requirements (typical)	2.2 W
Power Consumption PoE	2.7 W

Housing Type	Box
Housing Size (L x W x H)	42 mm x 29 mm x 29 mm
Weight	90 g
Lens Mount	CS-mount
Operating Temperature	0 °C - 50 °C

Basler ace acA1920-25gc (CS-Mount)

General Information

Sensor

EMVA Data

Camera Data

Housing

Technical Drawing

Manufacturer

Conformity

Documentation

Features

Easy Handling

Image Quality Optimization

Process Control

Speed Increase

Suitable Products

Recommended software

pylon vTools for image processing

pylon Software for image acquisition

All Basler ace Models

Product successfully added to cart

Auto Functions	Use the camera's auto functions to allow the camera to find the optimum settings for exposure time, gain, and white balance, for example. This simplifies camera integration into your application.
Presettings	Automate recurring steps in your application by using the camera's default settings and/or creating and saving your own presets.

Color Creation	With this set of features, you can correct artifacts in color images without affecting the structures in the image.
Image Adjustment	Adjust pixel values losslessly with Black Level, Digital Shift, and other standard features.

Digital I/Os	Control the camera via trigger commands or use the camera to control components of your vision system, such as lighting or encoders.
Information Utilisation	Use additional information from Chunks and Events to optimize your automation.
Sequencer	Program sequential processes in the camera to control image acquisition and pre-processing in real time.