Power Supply 24V/60W, DC Jack 5.5/2.1mm

Power Supply 24V/60W for Basler blaze, Basler Stereo Camera, or Stereo visard.

The power supply provides the required voltage for the Basler blaze Time-of-Flight camera and Basler Stereo Camera (when used with adapter cable 2200000948) or the Stereo visard (when used with adapter cable 2200002392). Adapter cables must be ordered separately.

This power supply is conform with Energy Efficiency Class VI and EMI FCC Class B.

An additional power cord (not included in the scope of delivery) is required for the operation.

Recommended accessories
- select -
CXP-12 Interface Card 1C +€969.00
imaWorx CXP-12 Quad +€1,639.00
CXP-12 Interface Card 2C +€1,079.00
CXP-12 Interface Card 4C +€1,569.00
- select -
Cable CXP, Micro-BNC x2 (HD BNC), P, 10 m +€109.00
Cable CXP, Micro-BNC x2 (HD-BNC), DrC,5m +€116.00
Cable CXP, Micro-BNC x2 (HD BNC), P, 5 m +€79.00
Cable CXP, Micro-BNC x2 (HD BNC), P, 3 m +€69.00
- select -
Power-I/O Cable, M8 6p/open, P, 5 m +€29.20
- select -
Power Supply for Camera 18.0W, M8 6-pin +€47.30
- select -
Heat sink for Basler boost R cameras +€14.00
- select -
F-mount for boost R, racer, Basler beat +€65.90
M42x0.75-mount (FBD 16 mm) for boost, racer, Basler beat +€17.90
C-mount for boost R, racer +€9.90
M42x1-mount (FBD 45.56 mm) for boost R, racer, Basler beat +€49.90
M42x1-mount (FBD 16 mm) for boost, racer, Basler beat +€17.90
Direct support from local Basler teamsSecure checkout and data protection
MastercardVisaShipping with FedEx
Show suitable products

Suitable Products