Basler boost boA6500-36cm

XGS 32000 Sensor
35 fps Frame rate
32.4 MP Resolution (MP)
CoaXPress (CXP-12) Interface
APS-C Sensor Format

The Basler boA6500-36cm CoaXPress camera with the onsemi XGS 32000 CMOS sensor delivers 36 frames per second at 32 MP resolution.

The boost series is available with different lens mounts (F-mount and M42-mount). These must be purchased separately for the camera.

Recommended accessories

画像入力ボード

- 選択してください -

imaWorx CXP-12 Quad +€1,589.00

CXP-12 Interface Card 4C +€1,529.00

データケーブル

- 選択してください -

Cable CXP, Micro-BNC x2 (HD BNC), P, 10 m +€109.00

Cable CXP, Micro-BNC x2 (HD-BNC), DrC,5m +€116.00

Cable CXP, Micro-BNC x2 (HD BNC), P, 5 m +€79.00

Cable CXP, Micro-BNC x2 (HD BNC), P, 3 m +€69.00

- 選択してください -

Power Supply 24V, HRS HR10A, 4p +€79.00

Heat Sink

- 選択してください -

Heat Sink for boost V (2pcs) +€59.00

- 選択してください -

boost V C-Mount +€49.00

boost V M58x0.75-Mount (FBD 11.48 mm) +€39.00

boost V M42x1-Mount (FBD 12mm) +€39.00

boost V F-Mount +€169.00

3-year warranty on Basler productsDirect support from local Basler teamsSecure checkout and data protection

Suitable Products

Recommended software

pylon vTools for image processing
Design robust image processing software for quality assurance and tracking. Functions such as blob analysis, matching, and code reader can be combined using drag-and-drop design and flexibly integrated into the target application.
pylon Software for image acquisition
pylon offers certified drivers for many camera interfaces, as well as simple programming interfaces and practical tools for camera setup.

Manufacturer	Basler
Order Number	108391
Product Family	boost R
Product Line
Camera Series	Basler boost
Camera Category	Area Scan Camera
Warranty	36 Months

Sensor Vendor	onsemi
Sensor	XGS 32000
Shutter	Global Shutter
Sensor Format	APS-C
Sensor Diagonal	26.28 mm
Sensor Type	CMOS
Sensor Size	21 mm × 15.8 mm
Resolution (H x V)	6580 px × 4935 px
Resolution	32.4 MP
Pixel Size (H x V)	3.2 μm × 3.2 μm
Frame rate	35 fpsCalculate individual frame rate
Mono/Color	Mono
Spectrum	Visible

Quantum Efficiency (typical/minimal)	56.5 % (typical)
Dark Noise (typical/maximal)	4.3 e¯ (typical)
Saturation Capacity (typical/minimal)	9.3 ke¯ (typical)
Dynamic Range (typical/minimal)	65.6 dB (typical)
Signal-to-Noise Ratio (typical/minimal)	39.7 dB (typical)

Interface	CoaXPress (CXP-12)
Image Data Interface	CoaXPress (2.5–12.5 Gbps)
Pixel Bit Depth	10 bits 12 bits
Synchronization	free-run hardware trigger software trigger
Exposure Control	hardware trigger programmable via the camera API
Digital Input	1
General Purpose I/O	2
Power Supply	PoCXP or 24 VDC
Power Requirements (typical)	9.8 W

Housing Type	Box
Protection Class
Housing Size (L x W x H)	49.1 mm x 80 mm x 80 mm
Weight	525 g
Lens Mount	F-mount M42 x 0.75 M42 x 1
Operating Temperature	0 °C - 50 °C

Basler boost boA6500-36cm

General Information

Sensor

EMVA Data

Camera Data

Housing

Technical Drawing

Manufacturer

Conformity

Documentation

Features

Easy Handling

Image Quality Optimization

Process Control

Speed Increase

Suitable Products

Recommended software

pylon vTools for image processing

pylon Software for image acquisition

Product successfully added to cart

Image Adjustment	Adjust pixel values losslessly with Black Level, Digital Shift, and other standard features.
Vignetting Correction	Correct lens shading artifacts that occur in acquired images.

Burst Mode	Acquire a sequence of images after triggering once and output them as required. In High-Speed Burst Mode, you can temporarily bypass the data limitation of GigE.
Information Utilisation	Use additional information from Chunks and Events to optimize your automation.
Intelligent Light Control (SLP)	Control the lighting directly with the camera. By synchronizing the flash mode and adjusting the brightness levels, you can quickly achieve precise lighting conditions and shorten the development time of your application.
Sequencer	Program sequential processes in the camera to control image acquisition and pre-processing in real time.