microEnable 5 marathon ACL

Camera Link Interface
2 No. of Ports
Acquisition Product Type
6.8 Gbps; 6.8 Gbps (850 MB/s) Data Bandwidth (p.port; Total)

microEnable 5 marathon ACL is a PCIe image acquisition device that allows the connection of two cameras of any Camera Link standard specification.

microEnable 5 marathon ACL focuses on high-speed image acquisition for all Camera Link compliant cameras, and offers with DMA1800 technology an powerful access to advanced Machine Vision applications.

All formats of Camera Link standard
Support of long cable length
Onboard image preprocessing functions
Industrial multi-device, multi-camera support
DMA 1800 / up to 1800 MB/s PCIe Data bandwidth (PCIe x4 Gen2)
Supports opto-decoupled signals via front I/O
Broad support of Third-party software interfaces
Versatile application and industry usage
Flexible and extensible model series
PoCL SafePower.

3-year warranty on Basler productsDirect support from local Basler teamsSecure checkout and data protection

Suitable Products

Recommended software

Framegrabber SDK

Basler’s software for frame grabber: from the first image capture and graphic application development to the configuration of the entire image processing system.

More about the Framegrabber SDK

Order Number	2200000358
Manufacturer	Basler
Type	Frame grabber
Product Series	marathon Frame Grabber
Product Type	Acquisition
Warranty	36 Months

Processor	Xilinx Kintex7 XC7K70T
On-Board Memory	512 MByte DDR3-RAM
I/O Module Interfaces (Trigger and Sync)	Front GPIO: up to 3 differential signals in, up to 4 single-ended signals in (depends on configuration), 2 TTL outputs
Power via Interface (p. port)	PoCL (4W/12V per connector, Safe Power)

Standard	Camera Link 2.0
Interface	Camera Link
Configurations	CL-base CL-deca (80bit) CL-dual base CL-full CL-medium
Connectors	2 x SDR/HDR26 (miniCL)
Cable Length	0 - 10 meters
Power output	4W/12V per Camera Link connector, PoCL, SafePower
Camera Support	area scan camera line scan camera
Sensor Type	CFA sensor (Bayer) Grayscale sensor RGB sensor
Sensor Resolution	16k*64k (area scan sensor), 32k (line scan sensor),16k (-65k) (line scan sensor, depends on applet)
Bit Depth	8-16-bit (grayscale) 24-48-bit (color)
Data Bandwidth	1 x 6.8 Gbit/s (850 MB/s)
Data Bandwidth (p.port; Total)	6.8 Gbps; 6.8 Gbps (850 MB/s)
Test Environment	Camera Simulator
No. of Ports	2

PC Bus Interface	PCIe 2.1 x4, DMA1800
PC Bus Interface Performance	up to 1800 MB/s (sustainable)

Trigger Board GPIO Interfaces	Box connector (34-pin)
On-board GPIO interface	One 34-pin flat cable connector onboard: 8 input signals and 8 output signals with open-drain optionally as 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422); 4 opto-coupled outputs (4,5V - 28V)
On-board Front GPIO Interface	2 TTL outputs, up to 20 MHz frequency One 15-pin D-Sub socket: 2 opto-coupled differential inputs (RS422) and 1 opto-coupled differential / single ended input
GPIO Synchronisation and Control	Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization
GPIO Interface Summary	4 in/2 out (max.), TTL or opto-coupled; differential or single-ended signals (configuration dependent) 8 in/8 out (max.), TTL or opto-coupled; differential or single-ended signals (configuration dependent)

microEnable 5 marathon ACL

Akeneo

General Information

Device Features

Camera Interface

Host PC Interface

Controls and General-Purpose I/Os

Processing Features

Physical and Environmental Information

Software

Manufacturer

Conformity

Documentation

Features

Easy Handling

Image Quality Optimization

Speed Increase

Suitable Products

Recommended software

Framegrabber SDK

Product successfully added to cart

Dimensions	PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height
Weight	200 g
Power Consumption / Power Source	12 V, 1 A Voltage, typ. current (actual values depend on processing)
Operating Temperature	50° (0 LFM), 60° (100 LFM) FPGA operating temperature: 0°C to 85°C, * LFM = Linear Feet per Minute, unit for measuring airflow velocity
Storage Temperature	-50 - 80 °C (-58 °F - 176 °F)
Relative Humidity (operating, storage)	5 - 90 % non-condensing (operating), 0 - 95 % (storage)
MTBF	pending

Software Drivers	Linux 64-Bit Windows 11 / 10 (64-Bit) Windows 11 / 10 (32-Bit)
Software Tools	Device Drivers Documentation microDiagnostics (Analysis and service tool) microDisplay (Acquisition control and viewer) SDK
Software API	.net interface Framegrabber SDK
FPGA Programming	not programmable
MV Software Compatibility	Halcon others on request VisionPro

Image Selector	Use a module to select the images you want to keep, process, or forward.
Invert	Invert the pixel values of your images to enable more efficient image processing.
Mirroring	Mirror the images in different directions to achieve your ideal hardware setup.
Tap Geometry Sorting	Reassign the sensor areas of the camera to obtain an evaluable image flow.

LUT	By creating a custom lookup table (LUT), you can replace the pixel values of your images with values you define yourself.
Offset/Gain/Gamma Correction	Change the brightness values of your images for efficient image processing and optimized monitor display.
White Balancing	Match the color values of your images to the system environment to achieve a more realistic representation.

Protection Class
Product Line