Basler boost boA1936-400cc
- IMX421 Sensor
- 400 fps Frame rate
- CoaXPress (CXP-12) Interface
- 3 MP Resolution (MP)
- 2/3" Sensor Format
The Basler CoaXPress 2.0 boA1936-400cc camera with the Sony IMX421 CMOS sensor delivers 400 frames per second with a 3 MP resolution.
Recommended accessories
Please select
CXP-12 Interface Card 1C +€939.00
imaWorx CXP-12 Quad +€1,589.00
CXP-12 Interface Card 2C +€1,049.00
CXP-12 Interface Card 4C +€1,529.00
Please select
Cable CXP, Micro-BNC x2 (HD BNC), P, 10 m +€105.50
Cable CXP, Micro-BNC x2 (HD-BNC), DrC,5m +€116.00
Cable CXP, Micro-BNC x2 (HD BNC), P, 5 m +€82.00
Cable CXP, Micro-BNC x2 (HD BNC), P, 3 m +€69.10
Please select
Power-I/O Cable, M8 6p/open, P, 5 m +€29.20
Please select
Power Supply for Camera 18.0W, M8 6-pin +€47.30
Please select
Heat sink for Basler boost R cameras +€14.00
| Net list price | €1,219.00 |
|---|---|
| Ready for dispatch |
|
General Information
| Manufacturer | Basler |
|---|---|
| Order Number | 108675 |
| Product Family | boost R |
| Camera Series | Basler boost |
| Camera Category | Area Scan Camera |
| Warranty | 36 Months |
Sensor
| Sensor Vendor | Sony |
|---|---|
| Sensor | IMX421 |
| Shutter | Global Shutter |
| Sensor Format | 2/3" |
| Sensor Diagonal | 11 mm |
| Sensor Type | CMOS |
| Sensor Size | 8.7 mm × 6.5 mm |
| Resolution (H x V) | 1936 px × 1464 px |
| Resolution | 3 MP |
| Pixel Size (H x V) | 4.5 μm × 4.5 μm |
| Frame rate | 400 fpsCalculate individual frame rate |
| Mono/Color | Color |
| Spectrum | Visible |
Camera Data
| Interface | CoaXPress (CXP-12) |
|---|---|
| Image Data Interface | CoaXPress (2.5–12.5 Gbps) |
| Pixel Bit Depth |
|
| Synchronization |
|
| Exposure Control |
|
| Digital Output | 1 |
| General Purpose I/O | 2 |
| Power Supply | PoCXP or 24 VDC |
| Power Requirements (typical) | 12 W |
Housing
| Housing Type | Box |
|---|---|
| Housing Size (L x W x H) | 45 mm x 80 mm x 80 mm |
| Weight | 480 g |
| Lens Mount |
|
| Operating Temperature | 0 °C - 50 °C |
Technical Drawing
Manufacturer
| Basler |
|---|
Conformity
- CE (incl. RoHS)
- CoaXPress 2.0
- EAC
- FCC
- GenICam
- KC
- RoHS
- UKCA
- UL
Features & Documentation
For more information about the features, visit the Documentation
Easy Handling
| Auto Functions | Use the camera's auto functions to allow the camera to find the optimum settings for exposure time, gain, and white balance, for example. This simplifies camera integration into your application. |
Image Quality Optimization
| Color Creation | With this set of features, you can correct artifacts in color images without affecting the structures in the image. |
| Image Adjustment | Adjust pixel values losslessly with Black Level, Digital Shift, and other standard features. |
| Vignetting Correction | Correct lens shading artifacts that occur in acquired images. |
Process Control
| Burst Mode | Acquire a sequence of images after triggering once and output them as required. In High-Speed Burst Mode, you can temporarily bypass the data limitation of GigE. |
| Information Utilisation | Use additional information from Chunks and Events to optimize your automation. |
| Intelligent Light Control (SLP) | Control the lighting directly with the camera. By synchronizing the flash mode and adjusting the brightness levels, you can quickly achieve precise lighting conditions and shorten the development time of your application. |
| Sequencer | Program sequential processes in the camera to control image acquisition and pre-processing in real time. |
| Timing | Control the start and end of an exposure individually. Add delays or synchronize multiple cameras in a GigE network using PTP. |
Speed Increase
| Data Reduction | Use the Binning, Decimation, or ROI features for customized data reduction. |