Allgemeine Information |
|||
---|---|---|---|
Artikelnummer | 2200000482 | ||
Netto-Listenpreis Für größere Mengen und individuelle Preise verwenden Sie bitte den Angebotswarenkorb. Netto-Listenpreis | Nutzen Sie den Angebotswarenkorb, um ein Preisangebot für dieses Produkt zu erhalten. | ||
Lieferzeit Die aktuelle Lieferzeit kann davon abweichen. Bei Bedarf erfragen Sie bitte die aktuelle Verfügbarkeit und nutzen Sie den Angebotswarenkorb. Lieferzeit |
ca. 7-8 Wochen
|
||
Bestimmungsland | |||
Kartentyp | Framegrabber | ||
Hersteller | Basler | ||
Modellname | imaWorx CXP-12 Quad | ||
Produktserie | imaWorx Frame Grabber | ||
Produktlinie | Acquisition |
Geräteeigenschaften |
||
---|---|---|
Prozessor | Xilinx Ultrascale+ KU3P | |
Speicherausbau | 1,5 GByte DDR4-RAM | |
E/A-Schnittstellen (Trigger und Synchronisation) | Trigger/GPIO-IF (Opto Trigger, TTL Trigger) |
Kamera-Schnittstelle |
||
---|---|---|
Standard | CoaXPress 2.0/2.1 | |
Schnittstelle |
|
|
Konfigurationen | CXP-12; up to 4 cameras | |
Steckerverbindung | 4 x Micro-BNC/HD-BNC | |
Spannungsversorgung | 17W/24V DC regulated power per CXP connector | |
Kameratypen | area scan camera, line scan camera | |
Sensortypen | Grayscale sensor, CFA sensor (Bayer), RGB sensor | |
Sensorauflösung | 32k*64k (area scan sensor), 16k (line scan sensor) | |
Bittiefe | 8-16-bit (grayscale), 24-48-bit (color) | |
Datenbandbreite | 4 x 12,5 Gbit/s | |
Bandbreite (pro Port; gesamt) | 12,5 Gbps; 50 Gbps | |
Anzahl Ports | 4 | |
Testumgebung | Camera Simulator |
Host PC Schnittstelle |
||
---|---|---|
PC Bus Schnittstelle | PCIe 3.1 x8 | |
PC Bus Übertragungsleistung | 7876 MB/s (theoretical), 6520 MB/s (typical/max.) |
Controls and General-Purpose I/Os |
||
---|---|---|
Trigger E/A Schnittstellen | Box connector (34-pin) | |
Onboard E/A Schnittstellen | One 34-pin flat cable connector onboard: 8 input signals and 8 output signals with open-drain optionally as 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422); 4 opto-coupled outputs (4,5V - 28V) | |
Onboard Slotblech E/A Schnittstellen | 3 differential input signals or 2 differential and 1 single-ended signal or 4 single-ended signals; 2 TTL-complaint output signals; configurable by software GPIOTool; max. voltage of the input signals between 4,5V and 25V | |
E/A Synchronisation und Steuerung | Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization | |
Zusammenfassung Signalschnittstellen | onboard: 8in/8out (max.), TTL or opto-coupled, Front GPIO: up to 3 differential signals in, up to 4 single-ended signals in (configuration dependent), 2 TTL outputs |
Verarbeitungsfunktionen |
||
---|---|---|
Basis-Funktionen | Invert, LUT, Mirroring, White Balance, ROI, Image Selector |
Geräte- und Umgebungsinformationen |
||
---|---|---|
Dimensions | PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height | |
Gewicht (typisch) | 274 g | |
Power consumption / Power Source | Typ. 13,4W@12V, excluding camera and I/O power output | |
Betriebstemperatur | 0 - 50°C (32°F - 122°F) | |
Lagerungstemperatur | -50 - 80°C (-58°F - 176°F) | |
Relative Humidity (operating, storage) | 5% - 90% non-condensing (operating), 0% - 95% (storage) | |
MTBF | 48.440 h | |
Konformität | KC, WEEE, REACH, RoHS, CE class A, FCC class B |
Software |
||
---|---|---|
Software-Treiber | Linux 64-Bit, Windows 11 / 10 (32-Bit), Windows 11 / 10 (64-Bit) | |
Software-Werkzeuge | microDisplay X (Acquisition control and viewer), microDiagnostics (Analysis and service tool), GenICam Explorer (Camera configuration tool), SDK, Documentation, Device Drivers, pylon Software Suite | |
Software API | Framegrabber SDK, .net interface, pylon SDKs | |
Kompatibilität BV-Software | Halcon, VisionPro, Labview |