Basler Light Spot-13FWHM-IR
- LED Lighting Type: Spot Light
- LED Color: Infrared (IR)
- Peak Wavelength (typical): 850 nm
- Connector Lighting: M8 socket, male, 4 pin
- Protection Class: IP54
The Basler Light Spot-13FWHM-IR is designed to illuminate objects at long distances. It provides direct light emission with a beam angle of 13°. The infrared (IR) LEDs have a peak wavelength of 850 nm. Via the M8 connector, the IP54-rated spotlight can be used either as a standalone light source or—with a Basler Sync Cable—as fully integrated, camera-controlled lighting.
When used with a Basler Sync Cable, the lighting can be controlled directly via the connected Basler camera without an external lighting controller. This reduces integration and cabling efforts as well as the complexity of the vision system.
- Control functions: synchronized flash operation, brightness adjustments, overdrive mode (for maximum light output)
- Control via bidirectional communication over a camera I/O line (Line 3)
- All control functions are GenICam-compliant, allowing them to be controlled via software, such as pylon. No separate software required.
- Automatic detection of the lighting model and initial configuration by the camera
The lighting can be operated without camera control, either in continuous mode or with triggered light. Optionally, the LEDs can be current-controlled using an external controller.
The spotlight is suitable for industrial inspection systems with limited installation space, larger working distances, and inspections of small objects or fine details..
Note: Starting with revision 5, the pin assignment differs in some cases. Please refer to the documentation.
Select your model
