NEW

Basler Cable M8-6P-M,HRS-6P-M,M8-4P-F,open,3m

  • Type: Sync Cable
  • Control: Lens & lighting
  • Interface: I/O
  • Cable Length: 3 m
The Basler Sync Cable is a 3-meter-long, intelligent power I/O cable. It enables lens and lighting control via the connected Basler camera. It also supplies power to the lens and lighting, and optionally, to the camera.

The cable is an X-cable with the following connectors:

  • M8 6-pin connector for camera, 50 cm long
  • Hirose 6-pin connector for lens, 50 cm long
  • M8 4-pin connector for lighting, 50 cm long
  • Open-end connector for host, 2.5 m long

The lens and lighting are controlled via bidirectional communication over an I/O line of the connected Basler camera. All control functions are GenICam-compliant, meaning they can be managed using a single software, such as pylon. No separate software is required for the lens or lighting.

The cable’s central control unit measures 8.5 cm x 5.4 cm (W x H) and features two mounting holes for attachment.

Show suitable products