브라우저가 오래되었습니다. 이 홈페이지의 일부 기능이 표시되지 않을 수 있습니다. 브라우저 업데이트 방법을 배우십시오.

확인
비전 시스템 설정하기 온라인 샵

Do Basler GigE Cameras Support VLAN Tagging as Defined in IEEE 802.1Q?

No, Basler cameras do not support VLAN tagging as defined in IEEE 802.1Q.

IEEE 802.1Q, often referred to as Dot1q, is the networking standard that supports virtual LANs (VLANs) on an IEEE 802.3 Ethernet network.

Some additional points to consider:

  1. If the VLAN tag is added or removed by the respective switch, then the camera won't notice.
  2. In the case that the camera shall add a tag the ace 2 does not provide a control to insert such a VLAN tag. Namely, such a case is not supported.
  3. The case when the camera receives an Ethernet frame with such a VLAN tag, because it was not removed by the switch, is untested. This means that we do not know if the camera will ignore the tag and will process the data or not. But the VLAN tag will definitively not be processed by the camera.

If this is a critical aspect for a project, and provided the associated volume is high enough, it may be worth asking our customisation team.

언제든지 연락주세요!

판매 문의
Basler 지원 서비스