お使いのブラウザが古くなっていますので、このウェブサイトのすべての機能が表示されない可能性があります。 お使いのブラウザの更新する方法をご覧ください。

OK

I’m using a Fast Ethernet switch or hub to connect my camera to a GigE network adapter, but my camera isn’t discovered. Why not?

Check your network adapter settings.

Go to Start>Control Panel>Network Connections and right click on your network adapter. Select Properties from the drop down menu. When the properties window opens, click the Configure button.

Look for a tab with a name such as Connection speed. If you see a tab like this, select the tab and set the "Speed & Duplex" property to "Automatic identification" or "Auto"

If you do not see a "Connection Speed" tab, select the "Advanced" tab and look for the "Speed & Duplex" property. Set the "Speed & Duplex" property to "Automatic identification" or "Auto".