Your browser is out of date. It may not display all features of this websites. Learn how to update your browser.

OK
Careers | Investors

Application Notes

Interfacing Basler GigE Cameras with Cognex VisionPro 7.2

This application describes the requirements and necessary adjustments for using a Basler GigE Vision camera with Cognex VisionPro 7.2 software.

The following issues are covered:

  • Hardware requirements PC with GigE network adapter, preferably with Intel PRO 1000 chipset, GigE cable of Cat 6 or higher)
  • Network adapter configuration for maximum bandwidth and initial camera detection via auto-IP addressing
  • IP address configuration to set network adapter and camera to mutually compatible static IP addresses
  • Configuring the GigE network adapter’s firewall to unblock certain UDP ports to allow data exchange with a connected camera
  • How to use the Cognex GigE Vision Configuration Tool
  • Testing the interface between Cognex VisionPro and the GigE camera with the VisionPro Quickbuild application.

Download now for free

Please click on the following link to start your download.