Recommended USB 2.0 Host Controllers for Basler dart and pulse Cameras
Document number: AW001344
This application note presents a summary of tests that have been performed by Basler to evaluate the operation of Basler dart and pulse USB 3.0 cameras on various USB 2.0 host controllers. The purpose of these tests was to make recommendations for USB 2.0 host controllers and chipsets that can be operated with these Basler cameras. However, Basler recommends that you always operate Basler dart and pulse USB 3.0 cameras on a USB 3.0 interface to ensure a fast and stable data transmission.
If a Basler dart or pulse USB 3.0 camera is connected to a USB 2.0 port, a number of restrictions and precautions must be taken into account. These are explained in this application note.
The content is as follows:
- Overview of the hardware and software used, preparation of the tests, test setup
- Test results giving recommendations for parameter settings and host controllers
- Summary and final recommendations