Your browser is out of date. It may not display all features of this websites. Learn how to update your browser.

OK
Careers | Investors

microEnable IV AQ4-GE - Frame grabber

microEnable IV AQ4-GE is a PCIe image acquisition device that allows the full bandwidth connection of two GigE Vision cameras.

microEnable IV AQ4-GE focuses on fast image acquisition with up to 4 x GigE Vision cameras and offers with DMA900 technology and Machine Vision SDK a professional access to GEV standard.

  • Lowest CPU load even in multi-device mode
  • Industrial and stable multi-camera support > Ease-of-use configuration software
  • Professional Machine Vision SDK support
  • DMA900 / up to 900 MB/s PCIe Data bandwidth (PCIe x4)
  • Professional GigE Vision solution
  • Broad support of Third-party software interfaces
  • Versatile application and industry usage
  • Flexible and extensible model series > Up to 100m cable length.

Add to request cart
Add to watch list
  • Frame grabber - microEnable IV AQ4-GE

Article Details

Model Name microEnable IV AQ4-GE
Order Number 2200000344
Series A-Series
Category Framegrabber

Device Features

Processor System Processor
On-Board Memory 256 MByte DDR-RAM

Camera Interface

Standard GigE
Configurations Single Link, LAG (specific protocol)
Connectors 4 x RJ45
Camera Support line scan camera, area scan camera
Sensor Type RGB sensor, Grayscale sensor, CFA sensor (Bayer)
Bit Depth 8-16-bit (grayscale), 24-48-bit (color)
Data Bandwidth 4 x 125 MB/s
Test Environment Camera Simulator

Host PC Interface

PC Bus Interface PCI Express x4 (Gen1), DMA900
PC Bus Interface Performance up to 900 MB/s (sustainable)

Controls and General-Purpose I/Os

GPIO Synchronisation and Control Software Trigger; Area Scan and LAG/Dual Link cameras with configurable trigger system, 2 digital Inputs, 2 digital outputs, exernal trigger, grabber controlled
GPIO Interface Summary 8in/8out (max.), TTL or opto-coupled

Processing Features

Basic Features LUT

Physical and Environmental Information

Dimensions PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height
Weight (typical) 136 g
Power consumption / Power Source 12V, 1.4 A 
Operating Temperature 0 - 40°C (32°F - 131°F), (optional -60°)
Storage Temperature -50 - 80°C (-58°F - 176°F)
MTBF on request
Compliances RoHS, REACH, WEEE

Software

Software drivers Linux 64-Bit, Linux 32-Bit, Windows 10 / 8 / 7 (64-Bit), Windows 10 / 8 / 7 (32-Bit)
Software Tools Device Drivers, Documentation, SDK, GenICam Explorer (Camera configuration tool), microDiagnostics (Service tool), microDisplay (Acquisition control and viewer)
Software API .net interface, Silicon Software SDK
FPGA programming not programmable
BV-Software Compatibility VisionPro, Halcon, Common Vision Blox
Additional Accessories

Additional Accessories

Here you can find suitable accessories for your frame grabber.

Frame grabber components such as the trigger boards complement the frame grabber to synchronize image acquisition with the entire image processing system in real-time. The signal processing controls sensors and actuators such as cameras, lighting, light barriers and encoders.

For microEnable IV frame grabbers, the temperature upgrade guarantees an increase of the factory approved operating temperature. Power Supply enables a direct power supply of the GigE Vision cameras via the frame grabber.

Matching accessories often sold together with this product:

 - Power Supply for Power over Ethernet (Slot)
 - Power Supply for Power over Ethernet (Slot)
Power Supply for Power over Ethernet (Slot)
Accessory Type Power Supplies
 - Power Supply for Power over Ethernet (Rack)
 - Power Supply for Power over Ethernet (Rack)
Power Supply for Power over Ethernet (Rack)
Accessory Type Power Supplies
 - Temperature Upgrade for microEnable 4
 - Temperature Upgrade for microEnable 4
Temperature Upgrade for microEnable 4
Accessory Type Housing Accessories
Triggerboard

Triggerboard

  • Opto trigger: opto-coupled signals
  • TTL trigger: standard TTL level
  • Multiple input and output signals (max. 8x in, 8x out)
  • Synchronization of the image acquisition process
  • Synchronization of multiple cameras in the image acquisition system
  • Control of the camera’s exposure time
  • Independent control of multiple cameras connected to a frame grabber
  • Highly flexible graphic programming of user-defined trigger functions with VisualApplets

Matching accessories often sold together with this product:

value

Manuals

The manuals provide complete information on all aspects of usage - from installing frame grabbers and software to first acquisition checks to advanced image processing. Described are all frame grabber series and models available together with their hardware and software add-ons, their specific functionalities and all image processing options along with the graphical FPGA development environment VisualApplets.

Frame Grabber - User Manual

All Manuals - microEnable IV AQ4-GE
value

Customer Stories

Basler Customer Stories describe a broad diversity of applications and potential uses for Basler frame grabbers on a variety of markets. They explain the requirements Basler’s customers had to face while designing their image processing system and how Basler frame frabbers successfully contributed to resolving the problem.

All Customer Stories - microEnable IV AQ4-GE

Compatible Cameras