Article Details |
||
---|---|---|
Order Number | 108089 | |
Accessory Type | Frame grabber | |
Accessory Developer | Basler | |
Model Name | microEnable 5 marathon VF2 | |
Product Line | V-Line | |
Category | Framegrabber |
Device Features |
||
---|---|---|
Processor | Vision Processor | |
On-Board Memory | 2 GByte DDR3-RAM |
Camera Interface |
||
---|---|---|
Standard | Camera Link HS | |
Configurations | Dual CLHS F2, Single CLHS F2 | |
Connectors | 2 x SFP | |
Camera Support | line scan camera, area scan camera | |
Sensor Type | Grayscale sensor, RGB sensor (VisualApplets) | |
Bit Depth | 8-16-bit (grayscale, Bayer, RGB, VisualApplets) | |
Data Bandwidth | 2 x 10 Gbit/s | |
Test Environment | Camera Simulator |
Host PC Interface |
||
---|---|---|
PC Bus Interface | PCI Express x4 (Gen 2), DMA1800 | |
PC Bus Interface Performance | up to 1.800 MB/s (sustainable) |
Controls and General-Purpose I/Os |
||
---|---|---|
On-board GPIO interface | 4 opto-coupled outputs (4,5V - 28V), One 34-pin flat cable connector onboard: 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422), Shaft encoder input, programmable rescaler, multiple-camera synchronization | |
On-board Front GPIO Interface | One 15-pin D-Sub socket: 2 opto-coupled differential inputs (RS422) and 1 opto-coupled differential / single ended input, RS485 interface (PLC connection) scheduled, Shaft encoder input, programmable rescaler: multiple-camera synchronization, optional (conf.): 4 opto-coupled Inputs (4,5V - 28V) with up to 1 MHz frequency, 2 TTL outputs, up to 20 MHz frequency | |
GPIO Synchronisation and Control | Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization | |
GPIO Interface Summary | onboard: 8in/8out (max.), TTL or opto-coupled |
Physical and Environmental Information |
||
---|---|---|
Dimensions | PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height | |
Weight (typical) | 150 g | |
Power consumption / Power Source | typ. 1 A @ 12V (actual values depend on image pre-processing) | |
Operating Temperature | 50° (0 LFM*), 60° (100 LFM*) FPGA operating temperature: 0°C to 85°C, * LFM = Linear Feet per Minute, unit for measuring airflow velocity | |
Storage Temperature | -50°C up to 80°C | |
Relative Humidity (operating, storage) | 5% - 90% non-condensing (operating), 0% - 95% (storage) | |
MTBF | pending | |
Compliances | WEEE, RoHS, REACH |
Software |
||
---|---|---|
Software drivers | Windows 10 / 8 / 7 (32-Bit), Windows 10 / 8 / 7 (64-Bit) | |
Software Tools | microDisplay (Acquisition control and viewer), GenICam Explorer (Camera configuration tool), microDiagnostics (Service tool), Device Drivers, SDK, Documentation | |
Software API | Silicon Software SDK, .net interface | |
FPGA programming | VisualApplets | |
BV-Software Compatibility | Halcon, Common Vision Blox, others on request |