Your browser is out of date. It may not display all features of this websites. Learn how to update your browser.

OK
Careers | Investors

Basler MED ace 5.1 MP 35 mono

The Basler MED ace 5.1 MP 35 mono USB 3.0 camera with the Sony IMX264 CMOS sensor delivers 35 frames per second at 5 MP resolution.

Please note that the EMVA data is preliminary.

Add to request cart
Add to watch list
  • Basler MED ace - Basler MED ace 5.1 MP 35 mono
  • Basler MED ace - Basler MED ace 5.1 MP 35 mono
  • Basler MED ace - Basler MED ace 5.1 MP 35 mono
  • Basler MED ace - Basler MED ace 5.1 MP 35 mono

General Information

Design-In Sample: Q3/2018
Series Production: 10/2018
Order Number 107613

Sensor

Sensor Vendor Sony
Sensor IMX264
Shutter Global Shutter
Max. Image Circle 2/3"
Sensor Type CMOS
Sensor Size 8.4 mm x 7.1 mm
Resolution (H x V) 2448 px x 2048 px
Resolution 5 MP
Pixel Size (H x V) 3.45 µm x 3.45 µm
Frame Rate 35 fps
Mono/Color Mono

EMVA Data

EMVA Quantum Efficiency (typical/minimal) 62.8 % / 56.0 %
Dark Noise (typical/maximal) 2.1 e¯ / 3.0 e¯
Saturation Capacity (typical/minimal) 10.4 ke¯ / 9.5 ke¯
Dynamic Range (typical/minimal) 71.7 dB / 70.0 dB
Signal-to-Noise Ratio (typical/minimal) 40.2 dB / 39.8 dB

Camera Data

Interface USB 3.0
Pixel Bit Depth 10 or 12 bits
Synchronization
  • software trigger
  • hardware trigger
  • free-run
Exposure Control
  • programmable via the camera API
  • hardware trigger
Digital Input 1
Digital Output 1
General Purpose I/O 2
Power Requirements
  • Via USB 3.0 interface
Power Consumption (typical) 2.5 W

Housing

Housing Type Box
Housing Size (L x W x H) 29.3 mm x 29 mm x 29 mm
Lens Mount
  • C-mount
Housing Temperature 0 - 50°C
Weight (typical) 80g

Conformity

Conformity
  • CE
  • RoHS
  • GenICam
  • IP30
  • FCC
  • USB3 Vision
  • UL

Features

Chunks
  • CRC Checksum
  • Counter Value
  • Exposure Time
  • Gain
  • Line Status All
  • Sequencer Set Active
  • Timestamp
Event Reporting
  • Critical Temperature
  • Exposure End
  • Frame Burst Start
  • Frame Burst Start Overtrigger
  • Frame Burst Start Wait
  • Frame Start
  • Frame Start Overtrigger
  • Frame Start Wait
  • Over Temperature
Image Acquisition Control
  • Acquisition Status
  • Frame Burst Start Trigger
  • Frame Start Trigger
  • Trigger Delay
  • Triggered by Hardware
  • Triggered by Software
Miscellaneous
  • Device Information Parameters
  • Device Temperature
  • Remove Parameter Limits
  • User Defined Values
  • User Sets (Configuration Sets)
PGI
Physical Interface and I/O Control
  • Debouncer
  • I/O Signals: Frame Burst Start Wait
  • I/O Signals: Frame Start Wait
  • I/O Signals: Timer 1 Active
  • I/O Signals: User Output
  • Minimum Output Pulse Width
Pixel Formats
  • Mono 12p (Mono 12 Packed)
  • Mono 8
Standard Features
  • Auto Function Profile
  • Binning Horizontal
  • Binning Vertical
  • Black Level
  • Digital Shift
  • Exposure Auto
  • Exposure Mode: Timed (Control via API)
  • Exposure Mode: Trigger Width (Control via External Trigger)
  • Gain
  • Gain Auto
  • Gamma Correction
  • Lookup Table (LUT)
  • Region of Interest (ROI)
  • Reverse X (Horizontal Mirroring)
  • Reverse Y (Vertical Mirroring)
  • Test Images
Basler MED Feature Sets for Medical & Life Sciences

Basler MED Feature Sets for Medical & Life Sciences

The Basler MED feature sets combine our cameras’ most impressive attributes, and stand out with their hardware, firmware and software features. Find features specifically designed for Medical & Life Sciences within the categories of Easy Compliance, Brilliant Image, Perfect Color, Low Light Imaging, High Speed and Industrial Excellence.

The feature sets are available with the Basler MED ace cameras. If a camera is listed in a given feature set, it incorporates one or more features of that set.

Please visit the Basler Features Check List to find the camera’s specific feature combination.

Read more about MED Feature Sets
Easy Compliance – MED Feature Set

Easy Compliance

Basler develops, produces and distributes the Basler MED ace cameras for Medical & Life Sciences under DIN EN ISO 13485:2016. In addition, we maintain all relevant standard conformities, such as CE, UL, EMC Class B, CISPR Class B or FCC Class B to support.

Read more about Easy Compliance
Brilliant Image – MED Feature Set

Brilliant Image

Get a supreme image out-of-the-box with the Brilliant Image feature set. Experience Basler MED cameras with the market-leading PGI algorithm for color and monochrome cameras, advanced auto white balancing, as well as smart auto contrast and auto exposure algorithms.

Read more about Brilliant Image
Industrial Excellence – MED Feature Set

Industrial Excellence

Basler cameras are 100% quality tested and are the market’s most robust and reliable products. Together with the pylon Camera SDK, our extended camera control features and a customer-focused support based on 30 years of vision experience, camera integration has never been more efficient.

Read more about Industrial Excellence
Lenses

Lenses

On all cameras from the MED ace camera series featuring sensors of 1/2'' or smaller, you'll benefit from a perfect harmonization of camera and Basler Lenses. For MED ace cameras with larger sensors, you'll find lenses from certified and reliable manufacturers. These lenses have been tested extensively for compatibility with our MED ace cameras. You'll also find matching lens accessories here.

Matching accessories often sold together with this product:

 - Kowa Lens LM6HC F1.8 f6mm 1
 - Kowa Lens LM6HC F1.8 f6mm 1
Kowa Lens LM6HC F1.8 f6mm 1"
Lens Mount C-mount
Max. Image Circle 1"
Focal Length 6.0 mm
Iris Range F1.8 - F16.0
Iris Type manual
 - Ricoh Lens FL-CC2514-2M F1.4 f25mm 2/3
 - Ricoh Lens FL-CC2514-2M F1.4 f25mm 2/3
Ricoh Lens FL-CC2514-2M F1.4 f25mm 2/3"
Lens Mount C-mount
Max. Image Circle 2/3"
Focal Length 25.0 mm
Iris Range F1.4 - F16.0
Iris Type manual
 - Computar Lens M0814-MP2 F1.4 f8mm 2/3
 - Computar Lens M0814-MP2 F1.4 f8mm 2/3
Computar Lens M0814-MP2 F1.4 f8mm 2/3"
Lens Mount C-mount
Max. Image Circle 2/3"
Focal Length 8.0 mm
Iris Range F1.4 - F16.0
Iris Type manual
 - Kowa Lens LM8HC F1.4 f8mm 1
 - Kowa Lens LM8HC F1.4 f8mm 1
Kowa Lens LM8HC F1.4 f8mm 1"
Lens Mount C-mount
Max. Image Circle 1"
Focal Length 8.0 mm
Iris Range F1.4 - F16.0
Iris Type manual
All Lenses - Basler MED ace 5.1 MP 35 mono
Cables

Cables

We offer a broad portfolio of data cables and Power I/O cables for the MED ace camera series.The Power I/O cables are part of the Basler Original Equipment family and have been designed for perfect harmonization with Basler cameras. The data cables have all also been extensively tested for compatibility with the MED ace cameras. We carefully preselect and review our suppliers to ensure long-term availability of these high-quality cables.

Matching accessories often sold together with this product:

 - Cable USB 3.0, Micro B screw lock/A, 3 m
 - Cable USB 3.0, Micro B screw lock/A, 3 m
Cable USB 3.0, Micro B screw lock/A, 3 m
Accessory Type Data Cables
Interface USB 3.0
Cable Length 3.0 m
Connector Camera Side USB 3.0 Micro B, locking screws
Connector Host Side USB 3.0 Type A
 - Power-I/O PLC+ Cable 6p/open, 10 m
 - Power-I/O PLC+ Cable 6p/open, 10 m
Power-I/O PLC+ Cable 6p/open, 10 m
Accessory Type IOs / Power Cables
Interface I/O
Cable Length 10.0 m
Connector Camera Side Hirose 6-pin (HR10A-7P-6S)
Connector Host Side none (open end)
 - Cable USB 3.0, Micro B sl / A, DrC, 5 m
 - Cable USB 3.0, Micro B sl / A, DrC, 5 m
Cable USB 3.0, Micro B sl / A, DrC, 5 m
Accessory Type Data Cables
Interface USB 3.0
Cable Length 5.0 m
Connector Camera Side USB 3.0 Micro B, locking screws
Connector Host Side USB 3.0 Type A
 - Opto-GP-I/O Y-Cable 6p/open, 2 x 10 m
 - Opto-GP-I/O Y-Cable 6p/open, 2 x 10 m
Opto-GP-I/O Y-Cable 6p/open, 2 x 10 m
Accessory Type IOs / Power Cables
Interface I/O
Cable Length 10.0 m
Connector Camera Side Hirose 6-pin (HR10A-7P-6S)
Connector Host Side none (open end)
All Cables - Basler MED ace 5.1 MP 35 mono
Additional Accessories

Additional Accessories

You'll find additional accessories for your MED acee camera here: Among the products we offer are pre-tested host adapter cards (PCIe), power supplies, hubs and switches, all optimally matched with the MED ace camera series.

Matching accessories often sold together with this product:

 - USB 3.0 Card PCIe, Fresco FL1100, 4HC, x4, 4Ports

USB 3.0 Card PCIe, Fresco FL1100, 4HC, x4, 4Ports

Get this product directly from Basler

Add to request cart

Order this product from one of our partners

 - USB 3.0 Card PCIe, Fresco FL1100, 4HC, x4, 4Ports
USB 3.0 Card PCIe, Fresco FL1100, 4HC, x4, 4Ports
Accessory Type Cards, Hubs, Switches
 - USB 3.0 Hub, 4 Ports side by side

USB 3.0 Hub, 4 Ports side by side

Get this product directly from Basler

Add to request cart

Order this product from one of our partners

 - USB 3.0 Hub, 4 Ports side by side
USB 3.0 Hub, 4 Ports side by side
Accessory Type Cards, Hubs, Switches
All Additional Accessories - Basler MED ace 5.1 MP 35 mono
value
value

White Papers

Basler White Papers provide a comprehensive overview of the fundamental theory of industrial image processing. The authors are all experts in their respective fields and go into detail on relevant thematic points of interest to novices and experienced users alike.

All White Papers - Basler MED ace 5.1 MP 35 mono
value

Success Stories

Basler Success Stories describe a broad diversity of applications and potential uses for Basler camera models on a variety of markets. They explain the requirements Basler’s customers had to face while designing their image processing system and how Basler cameras successfully contributed to resolving the problem.

All Success Stories - Basler MED ace 5.1 MP 35 mono
value

Application Notes

Application Notes provide information beyond the scope of the user’s manuals related to working with Basler cameras, components and software. They typically contain detailed instructions on optimizing your camera or configuring the software.

All Application Notes - Basler MED ace 5.1 MP 35 mono
value

Marketing Notes

Basler Marketing Notes highlight noteworthy information about the technical properties and features of various camera models. The notes focus strongly on product-related topics, offering insights from the point of view of a Basler product manager.

All Marketing Notes - Basler MED ace 5.1 MP 35 mono
value

CAD / Technical Drawings

CAD (Computer-Aided Design) drawings for the Basler ace contain technical drawing of the camera in 2D and a volume model in 3D.

All CAD / Technical Drawings - Basler MED ace 5.1 MP 35 mono
value

Brochures

Basler product brochures provide an overview of the many benefits offered by Basler ace cameras. They describe technical characteristics and camera features and offer detailed information about the technical specifications.

All Brochures - Basler MED ace 5.1 MP 35 mono
value

Release Notes

Release Notes are part of the documentation for the Basler pylon Camera Software Suite and contain not just release data and software version information, but also notes on improvements, known bugs and changes.

All Release Notes - Basler MED ace 5.1 MP 35 mono
value

ReadMe

ReadMe files are short sets of instruction related to software installation. They are included in plain text form as part of the documentation of the Basler pylon Camera Software Suite. They typically contain information about system requirements, performance optimizations, sample programs, environmental variables and version information.

All ReadMe - Basler MED ace 5.1 MP 35 mono
value

Certificates

Certificates such as the Declaration of EC Conformity, the ISO 9001 Certificate and the KCC Certificate document that Basler products conform to the respective standards and guidelines.

All Certificates - Basler MED ace 5.1 MP 35 mono

Mechanical drawing for Basler MED ace 5.1 MP 35 mono

Mechanical drawings provide the detailed measurements of a camera product. Click on the link below to download the mechanical drawing for Basler MED ace 5.1 MP 35 mono.

Download now Basler MED ace - Basler MED ace 5.1 MP 35 mono