Machine Vision

 

The Basler Camera Configuration Tool Plus (CCT+) is a convenient Windows® based tool that can be used to change camera settings via a serial connection.

The CCT+ is designed to work with our most current Camera Link cameras. To see a list of cameras that will work with the CCT+, use the link below to download the readme file. The readme file includes a list of the cameras supported by the latest version of the CCT+.

The most current CCT+ version, 1.1.0361, is available in two editions, full and update. To determine which is right for you, please read the information below.


Full Edition

You should use the full edition if you have never installed CCT+ software on your computer. You should also use the full edition if you already have CCT+ software on your computer with a version number of 1.1.0280 or lower and you want to upgrade. (You can find the version number of the CCT+ in Help/About.) When using the full edition to upgrade from an earlier version of the CCT+, please uninstall the older version first.

The full edition includes two parts. The first part is a Readme file that contains some tips in case you have trouble with the installation or problems during first use. We strongly recommend that you download and read this file before you begin your CCT+ installation. Use the link below to download the CCT+ Readme file:

The second part of the full edition is the install executable. Use the link below to download the install executable for the CCT+:

Update Edition

If you already have version 1.1.0281 or higher CCT+ software installed on your computer, you can use the update. (You can find the version number of the CCT+ in Help/About.) The update adds funtionality for our newest cameras. Use the link below to download the update:

Please report bugs to: vc.support.europe@baslerweb.com


Note: The CCT+ is not designed for use with Basler IEEE 1394 cameras. The Basler BCAM 1394 driver should be used with IEEE 1394 cameras.